12.5.2019, 13:04
(09.5.2019, 22:12)plesi Napsal(a): Asi jsem zaspal...Astrometa se Sony šlape i na CoreElec 9.0.1 a to už se dá i používat.
EDIT:
Tak bohužel...Astrometa se sony se odpojuje .. Ještě si budeme muset počkat.
Problém způsobuje TVHeadend 4.2 xxxx
Malý rozbor pro LibreElec 9.0.1:
> Předmět: LibreElec a TVHeadend - zapomínání tunerů po restartu
v LibreElec je videt ze verze 9.0.1
po kazdem startu USB zarizeni (tu Astrometu identifikuje dobre, oba cipy Realtek i SONY)
dmesg:
Kód:
[ 27.414011] usb 1-1.3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 27.547420] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 27.547451] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
[ 27.547461] usb 1-1.3: media controller created
[ 27.548859] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 27.556437] i2c i2c-3: Added multiplexed i2c bus 4
[ 27.556447] rtl2832 3-0010: Realtek RTL2832 successfully attached
[ 27.564271] i2c i2c-3: cxd2841er_attach(): I2C adapter dea913da SLVX addr 6e SLVT addr 6c
[ 27.568446] i2c i2c-3: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend
[ 27.568456] i2c i2c-3: cxd2841er_attach(): chip ID 0xb1 OK.
[ 27.568468] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 27.568487] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[ 27.568679] usb 1-1.3: DVB: registering adapter 0 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)...
[ 27.568689] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered.
[ 27.575903] r820t 4-003a: creating new instance
[ 27.582681] r820t 4-003a: Rafael Micro r820t successfully identified
[ 27.582697] r820t 4-003a: attaching existing instance
[ 27.604094] r820t 4-003a: Rafael Micro r820t successfully identified
[ 27.623063] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
[ 27.623083] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
[ 27.623098] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
[ 27.631645] Registered IR keymap rc-empty
[ 27.631847] rc rc0: Astrometa DVB-T2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[ 27.632870] input: Astrometa DVB-T2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
[ 27.634042] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
[ 27.634270] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 27.642422] usb 1-1.3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
[ 27.642751] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 27.917794] input: eventlircd as /devices/virtual/input/input1Poprvé jede. Po restartu nebo vypnutí už pak ne.
Po nastartování TVHeadened server se špatně obnoví konfigurace přiřazení tunerů
Kód:
LibreELEC:~ # cat /storage/.kodi/userdata/addon_data/service.tvheadend42/input/linuxdvb/adapters/9d84dad05c885fe8d8a91db0bf0c
47ce
{
"rootpath": "/dev/dvb/adapter0",
"frontends": {
"DVB-C #1": {
"pids_max": 32,
"pids_use_all": true,
"powersave": false,
"tune_repeats": 0,
"skip_bytes": 0,
"ibuf_size": 188000,
"status_period": 1000,
"old_status": false,
"enabled": false,
"priority": 0,
"spriority": 0,
"displayname": "Sony CXD2837ER DVB-T/T2/C demodulator #0 : DVB-C #1",
"ota_epg": true,
"initscan": true,
"idlescan": true,
"free_weight": 0,
"remove_scrambled": false,
"networks": [
],
"linked": "",
"type": "DVB-C",
"uuid": "01297abf0fd127758859f8c1f8952afc"
},
"DVB-T #1": {
"lna": false,
"pids_max": 32,
"pids_use_all": true,
"powersave": false,
"tune_repeats": 0,
"skip_bytes": 0,
"ibuf_size": 188000,
"status_period": 1000,
"old_status": false,
"enabled": false,
"priority": 0,
"spriority": 0,
"displayname": "Sony CXD2837ER DVB-T/T2/C demodulator #0 : DVB-T #1",
"ota_epg": true,
"initscan": true,
"idlescan": true,
"free_weight": 0,
"remove_scrambled": false,
"networks": [
],
"linked": "",
"type": "DVB-T",
"uuid": "58786286228fce17032aeb667f484244"
},
"DVB-T #0": {
"lna": false,
"pids_max": 32,
"pids_use_all": true,
"powersave": false,
"tune_repeats": 0,
"skip_bytes": 0,
"ibuf_size": 188000,
"status_period": 1000,
"old_status": false,
"enabled": false,
"priority": 0,
"spriority": 0,
"displayname": "Realtek RTL2832 (DVB-T) #0 : DVB-T #0",
"ota_epg": true,
"initscan": true,
"idlescan": true,
"free_weight": 0,
"remove_scrambled": false,
"networks": [
],
"linked": "",
"type": "DVB-T",
"uuid": "608818d102e88c1758adc13e87a2f7b7"
}
}
}Pokud se tato konfigurace smaže:
Kód:
LibreELEC:~ # rm -f /storage/.kodi/userdata/addon_data/service.tvheadend42/input/linuxdvb/adaptersRestartovat tvheadend nebo jednodušeji celé Raspberry
poté není co obnovit, tvheadend vytvoří vše znovu dle aktuálních adaptérů v systému
a je třeba tunery znovu přes web aktivovat a přiřadit k muxu:
Tedy:
http://xxxxxxxx:9981
Konfigurace - DVB vstupy - TV adaptéry
klik na adapter (ma u sebe cervenou tecku) a vpravo v zakladnich informacich Povolit a Vyplnik volbu Sítě.
Řešení???
Počkat na opravenej TVHeadend v doplňku Kodi v LibreELEC, nebo dat doplněk do pryč a nainstalovat nějakej balík TVHeadend, kterej bude s LibreElec kompatibilní a bude stejné verze nebo větší :v4.3-1787-g453ee8dfd
Bug report na TVHeadendu
https://tvheadend.org/issues/5128