Jj,3D tisk by byl v pohodě:-) Také plexi proti sobě a nebo malá krabička. Přidám tam 2 hliníkové chladiče;-)
Jo jinak jsem ho testoval na K1 plus (S905) LibreElec-kszaq 8.2.3.1/kernel 3.14.29 a vše bez problémů...(ovladače jsou už součástí)
Odkaz na FW máš o stránku nebo dvě zpět,ale kopírovat se budou muset někam jinam,protože mám pocit "filesystem is read only".Jestli máš spuštěný tvheadend,tak se nediv,že ti nejde w_scan.
Kód:
:5
[ 1.887643@2] get property: gpio_dat3, str:
[ 1.887652@2] sd:pdata->caps = 7
[ 1.887654@2] sd:pdata->caps2 = 0
[ 1.887655@2] sd:pdata->pm_caps = 0
[ 1.887731@2] [aml_is_card_insert] card IN
[ 1.988922@2] normal card in
[ 2.031762@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.031780@1] aml_sd_emmc_probe: line 3594
[ 2.031964@1] aml_sd_emmc_reg_init 1149
[ 2.032012@1] get property: ocr_avail, value:0x00200080
[ 2.032014@1] get property: f_min, value:400000
[ 2.032015@1] get property: f_max, value:200000000
[ 2.032018@1] get property: max_req_size, value:0x00020000
[ 2.032022@1] get property: pinname, str:sdio
[ 2.032025@1] get property: card_type, value:3
[ 2.032048@1] sdio:pdata->caps = 7810f
[ 2.032049@1] sdio:pdata->caps2 = 0
[ 2.032052@1] sdio:pdata->pm_caps = 1
[ 2.071568@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.071828@1] ion_dev has 1 memory regions
[ 2.074017@1] fb: osd_init_module
[ 2.074111@1] fb: viu vsync irq: 35
[ 2.074116@1] meson-fb has 1 memory regions
[ 2.074148@1] meson-fb meson-fb.15: assigned reserved memory node linux,meson-fb ok
[ 2.074164@1] fb: osd_probe vinfo:ffffffc001b3d5f0
[ 2.074168@1] fb: init fbdev bpp is:32
[ 2.165600@0] hdmitx: edid: check sum valid
[ 2.165634@1] [aml_is_card_insert] card IN
[ 2.173753@0] hdmitx: edid: check sum valid
[ 2.173851@1] fb: set osd0 reverse as NONE
[ 2.181949@1] fb: osd probe OK
[ 2.182028@0] [aml_is_card_insert] card IN
[ 2.182035@0] hdmitx: edid: blk0 raw data
[ 2.182065@0] 00ffffffffffff0004ef010031304e432d170103a01e1761eae4de9e544a9723
[ 2.182065@0] 1c4c540008008180814081000101950001010101010164190040410026301888
[ 2.182065@0] 360000c010000018023a801871382d40582c4500dd0c1100001e662150b05100
[ 2.182065@0] 1b304070360032313400001e000000fa00819981c081fc01010101950f0a013c
[ 2.182065@0]
[ 2.182065@0]
[ 2.182066@0] hdmitx: edid: blk1 raw data
[ 2.182093@0] 02031b61230907078301000067030c002000802d43908402e2000f8c0ad08a20
[ 2.182093@0] e02d10103e9600a05a0000000000000000000000000000000000000000000000
[ 2.182093@0] 0000000000000000000000000000000000000000000000000000000000000000
[ 2.182093@0] 0000000000000000000000000000000000000000000000000000000000000029
[ 2.182093@0]
[ 2.182093@0]
[ 2.182120@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[ 2.182126@0] hdmitx: video: get current mode: 1080p60hz
[ 2.182127@0] hdmitx: update rx hdr info 0
[ 2.182129@0] hdmitx: update physcial size: 300 230
[ 2.182148@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
[ 2.182154@0] hdmtix: set audio
[ 2.182164@0] hdmitx tx_aud_src = 0
[ 2.182173@0] hdmitx: system: irq 80000001
[ 2.182204@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[ 2.182207@0] hdmitx aud_n_para = 6144
[ 2.182223@0] hdmitx set channel status
[ 2.213768@2] sd: new high speed SDHC card at address 59b4
[ 2.315967@0] sd: clock 50000000, 4-bit-bus-width
[ 2.315967@0]
[ 2.315967@0] Start = 0x10000100 End = 0x100001ff
[ 2.316147@1] ge2d: ge2d_init_module
[ 2.316156@1] ge2d: ge2d_dev major:243
[ 2.316326@2] mmcblk0: sd:59b4 SMI 7.50 GiB
[ 2.316506@1] ge2d: ge2d clock is 400 MHZ
[ 2.316510@1] ge2d: ge2d: pdev=ffffffc026c65a00, irq=182, rstc=0xffffffc026ed5500, clk=ffffffc010373e00
[ 2.316579@1] ge2d: mapped phy: 0xd0160000
[ 2.316586@1] ge2d: ge2d start monitor
[ 2.316860@1] ge2d: ge2d workqueue monitor start
[ 2.316978@1] codec:Amlogic A/V streaming port init
[ 2.318180@2] codec:get gate demux control ok ffffffc026ffbf80
[ 2.318184@2] codec:get gate parser_top control ok ffffffc026ffbf40
[ 2.318187@2] codec:get gate vpu_intr control ok ffffffc026ffbcc0
[ 2.318192@2] codec:get gate vdec control ok ffffffc026ffb940
[ 2.318746@2] codec:[tsync_pcr_init]init success.
[ 2.318824@2] codec:amvideocap_probe,amvideocap
[ 2.318826@2] codec:use cma buf.
[ 2.320382@2] codec:vdec_request_irq ffffffc001552d80, vsync
[ 2.320549@2] codec:create_ge2d_work_queue video task ok
[ 2.416201@0] [0x10000103]: 0x00000008
[ 2.416266@3] mmcblk0: p1 p2
[ 2.416288@2] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 36050000 reg_buf ffffffc0260a0000
[ 2.416291@2] rdma_register success, handle 2 table_size 32768
[ 2.416293@2] video_rdma:rdma_init video rdma handle = 2.
[ 2.416306@2] codec:register clk_set_setting cpu[31]
[ 2.416959@2] DI: di_module_init ok.
[ 2.416965@2] DI: di_module_init: major 239
[ 2.417288@2] DI: di_probe
[ 2.417411@2] deinterlace has 1 memory regions
[ 2.417470@2] DI: di reveser memory 0x3c900000, size 30MB.
[ 2.417477@2] deinterlace deinterlace.25: assigned reserved memory node linux,di ok
[ 2.417482@2] DI-di_probe: get flag_cma error.
[ 2.417505@2] di_irq:78,timerc_irq:38
[ 2.417647@2] rdma_register, rdma_table_addr ffffff800043a000 rdma_table_addr_phy 3604a000 reg_buf ffffffc026010000
[ 2.417649@2] rdma_register success, handle 3 table_size 8192
[ 2.417650@2] DI: di_probe allocate rdma channel 3.
[ 2.417653@2] DI: DI hw version 2.
[ 2.417665@2] 0x000000db:Y=db,U=0,V=0
[ 2.417666@2] 0x000000dc:Y=dc,U=0,V=0
[ 2.417668@2] 0x000000dd:Y=dd,U=0,V=0
[ 2.417669@2] 0x000000de:Y=de,U=0,V=0
[ 2.417671@2] 0x000000df:Y=df,U=0,V=0
[ 2.417672@2] 0x000000e0:Y=e0,U=0,V=0
[ 2.417673@2] 0x000000e1:Y=e1,U=0,V=0
[ 2.417675@2] 0x000000e2:Y=e2,U=0,V=0
[ 2.417676@2] 0x000000e3:Y=e3,U=0,V=0
[ 2.417677@2] 0x000000f0:Y=f0,U=0,V=0
[ 2.417681@2] 0x000000f1:Y=f1,U=0,V=0
[ 2.417683@2] 0x000000f2:Y=f2,U=0,V=0
[ 2.417684@2] 0x000000f3:Y=f3,U=0,V=0
[ 2.417685@2] 0x000000f4:Y=f4,U=0,V=0
[ 2.417687@2] 0x000000f5:Y=f5,U=0,V=0
[ 2.417688@2] 0x000000f6:Y=f6,U=0,V=0
[ 2.417690@2] 0x000000f7:Y=f7,U=0,V=0
[ 2.417692@2] 0x000000f8:Y=f8,U=0,V=0
[ 2.417693@2] 0x000000f9:Y=f9,U=0,V=0
[ 2.417694@2] 0x000000fa:Y=fa,U=0,V=0
[ 2.417696@2] 0x000000fb:Y=fb,U=0,V=0
[ 2.417697@2] 0x000000fc:Y=fc,U=0,V=0
[ 2.418105@2] efusekeynum: 4
[ 2.418111@2] efusekeyname: macoffset: 0size: 6
[ 2.418116@2] efusekeyname: mac_btoffset: 6size: 6
[ 2.418121@2] efusekeyname: mac_wifioffset: 12size: 6
[ 2.418124@2] efusekeyname: usidoffset: 18size: 16
[ 2.418297@2] efuse efuse.10: probe OK!
[ 2.418491@2] key unify config unifykey-num is 14
[ 2.418533@2] key unify fact unifykey-num is 14
[ 2.418537@2] aml_unifykeys_probe:1280=============unifykey_devno:ed00000
[ 2.418697@2] 6unifykey: device unifykeys created ok
[ 2.418767@2] 6aml_unifykeys_init done!
[ 2.418769@2] PPMGRDRV: warn: ppmgr module init func called[ 2.418811@2] PPMGRDRV: err: ppmgr_driver_probe called
[ 2.418813@2] ppmgr has 1 memory regions
[ 2.418842@2] PPMGRDRV: info: init ppmgr memsource 3a900000->3c8fffff
[ 2.418849@2] PPMGRDRV: info: ppmgr_dev major:236
[ 2.419012@2] PPMGRDRV: info: ppmgr_probe done
[ 2.419193@2] amlogic rfkill init
[ 2.419295@2] audio_dsp: [dsp]register dsp to char divece(257)
[ 2.419810@2] amaudio: amaudio: driver amaudio succuess!
[ 2.419862@2] vdin_drv_init: major 235
[ 2.420018@2] vdin_drv_init: vdin driver init done
[ 2.420020@2] tvafe_drv_init: major 234
[ 2.420165@2] tvafe: tvafe_init.
[ 2.420313@2] [RX]-hdmirx: hdmirx_init.
[ 2.420315@2] ESM HLD: Initializing...
[ 2.420317@2] ESM HLD: Registering device range 'esm_rx'...[ 2.420322@2] ESM HLD: Device range 'esm_rx' has been registered.
[ 2.420323@2] ESM HLD: Creating class /sys/class/elliptic_rx...
[ 2.420373@2] ESM HLD: The class /sys/class/elliptic_rx has been created.
[ 2.420375@2] ESM HLD: Creating device 'esm_rx'...
[ 2.420469@2] ESM HLD: Device 'esm_rx' has been created.
[ 2.420470@2] ESM HLD: Done initializing the HLD driver.
[ 2.420473@2] module init
[ 2.420675@2] storage 2, boot 2
[ 2.420676@2] get_storage_dev return 2
[ 2.420679@2] nandphy: Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
[ 2.420826@2] nandphy: ######STS IRQ mode for nand driver
[ 2.420882@2] nandphy: NAND device id: ad de 14 a7 42 4a ad de
[ 2.420886@2] nandphy: detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
[ 2.479783@2] nandphy: clk_reg = 81000244
[ 2.479785@2] nandphy: bus_c=6,bus_t=7,sys=4.0ns,T_REA=16,T_RHOH=15
[ 2.479788@2] nandphy: new oob mode
[ 2.482395@2] nandphy: get def value at blk:8,page:2048
[ 2.486962@2] nandphy: NAND CKECK:arg nbbt:arg_valid=1,blk_addr=11,page_addr=0
[ 2.491074@2] nandphy: NAND CKECK:arg ncnf:arg_valid=1,blk_addr=5,page_addr=0
[ 2.516604@2] nandphy: NAND CKECK:arg phyp:arg_valid=0,blk_addr=0,page_addr=0
[ 2.516606@2] nandphy: found NO arg : phyp info
[ 2.544362@3] nandphy: NAND CKECK:arg nkey:arg_valid=1,blk_addr=4,page_addr=54
[ 2.579154@3] nandphy: NAND CKECK:arg ndtb:arg_valid=1,blk_addr=7,page_addr=18
[ 2.618742@3] nandphy: NAND CKECK:arg nenv:arg_valid=1,blk_addr=10,page_addr=60
[ 2.620977@3] nandphy: adjust phy offset:4
[ 2.620987@3] nandphy: adjust phy offset:4
[ 2.621008@3] nandphy: size = 176 arg_pages = 1 extra_page = 0
[ 2.861394@0] [0x10000104]: 0x00000001
[ 2.865072@3] nandphy: dummy random data:pgnum=0 pgaddr=901[ 2.865215@0] [0x10000170]: 0x00000010
[ 2.865239@0] [0x10000180]: 0x000000ff
[ 2.865241@0] [0x10000181]: 0x000000ff
[ 2.865244@0] [0x10000182]: 0x00000003
[ 2.865246@0] [0x10000183]: 0x00000007
[ 2.865249@0] [0x10000184]: 0x0000003f
[ 2.865251@0] [0x10000185]: 0x00000002
[ 2.865255@0] [0x10000187]: 0x000000ff
[ 2.865258@0] [0x10000188]: 0x00000003
[ 2.905039@0] nandphy: dummy random paired data:pgnum=0 pgaddr=902
[ 2.917170@0] nandphy: dummy random data:pgnum=2 pgaddr=905[ 2.918175@0] nandphy: dummy random paired data:pgnum=2 pgaddr=906
[ 2.926365@0] nandphy: nfboot :
[ 2.926672@0] nandphy: off:0x000000000000-0x000001000000 :partn=0:single_chip single_plane
[ 2.934871@0] nandphy: nfcache :
[ 2.938316@0] nandphy: off:0x00000d000000-0x000026000000 :partn=1:single_chip multi_plane
[ 2.946436@0] nandphy: nfcode :
[ 2.949873@0] nandphy: off:0x000033000000-0x00007a000000 :partn=9:single_chip multi_plane
[ 2.957985@0] nandphy: nfdata :
[ 2.961436@0] nandphy: off:0x0000ad000000-0x000153000000 :partn=1:single_chip multi_plane
[ 2.971353@3] ntd->name: nfcache
[ 2.972750@3] nftl: nftl version 160602M
[ 2.976669@3] nftl: get the phy_dev_size=20000000H tmp_off_size=200000H phy_dev_block=41H
[ 2.984732@3] nftl: nftl start:size_in_blk=76,free_block_num=11
[ 3.030180@3] nftl: average_erase_count:0
[ 3.030201@3] nftl: used_blk_cnt = 5,total_blocks = 65
[ 3.038801@3] nftl: current_block1 = 71
[ 3.053064@3] nftl: create_part_list:868, current block used page: 13
[ 3.053858@3] nftl: free block cnt = 71
[ 3.057650@3] nftl: new current block is 70
[ 3.337009@0] nftl: prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[ 3.961129@0] nftl: current_used_discard_block=69,current_discard_block_used_count=10
[ 3.963500@0] nftl: unmappig_pages=16117,discarded_pages=0,mapping_pages=523
[ 3.971597@3] ntd->name: nfcode
[ 3.973398@3] nftl: nftl version 160602M
[ 3.977446@3] nftl: size_in_blk 244; total_block 241;
[ 3.982293@3] nftl: get the phy_dev_size=6b000000H tmp_off_size=6b0000H phy_dev_block=d7H
[ 3.990383@3] nftl: nftl start:size_in_blk=241,free_block_num=26
[ 4.117890@3] nftl: average_erase_count:0
[ 4.117912@3] nftl: used_blk_cnt = 104,total_blocks = 215
[ 4.229902@3] nftl: free block cnt = 136
[ 4.229921@3] nftl: new current block is 138
[ 4.232424@3] nftl: current_used_discard_block=136,current_discard_block_used_count=107
[ 4.240973@3] nftl: unmappig_pages=32120,discarded_pages=0,mapping_pages=22920
[ 4.251481@3] ntd->name: nfdata
[ 4.251517@3] nftl: nftl version 160602M
[ 4.254986@3] nftl: size_in_blk 678; total_block 648;
[ 4.259502@3] nftl: the space is size = -1
[ 4.526503@3] nftl: found discard block:525
[ 4.596460@3] nftl: average_erase_count:0
[ 4.596485@3] nftl: used_blk_cnt = 146,total_blocks = 585
[ 4.751246@3] nftl: current_block1 = 524
[ 4.877431@3] nftl: create_part_list:868, current block used page: 124
[ 4.879305@3] nftl: currnet_discard_block1 = 525
[ 4.886179@3] nftl: reach the last discard page:2
[ 4.887616@3] nftl: free block cnt = 510
[ 4.891420@3] nftl: new current block is 523
[ 5.473515@0] nftl: prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[ 5.806818@0] nftl: discard_page_cnt = 2
[ 5.806838@0] nftl: current_used_discard_block=525,current_discard_block_used_count=148
[ 5.814796@0] nftl: unmappig_pages=126262,discarded_pages=3854,mapping_pages=19644
[ 5.822248@3] saradc c1108680.saradc: initialized by BL30
[ 5.825903@3] saradc c1108680.saradc: calibration start:
[ 5.831198@3] saradc c1108680.saradc: nominal=0, value=8
[ 5.836471@3] saradc c1108680.saradc: nominal=256, value=254
[ 5.842069@3] saradc c1108680.saradc: nominal=512, value=508
[ 5.847670@3] saradc c1108680.saradc: nominal=768, value=764
[ 5.853280@3] saradc c1108680.saradc: nominal=1023, value=1017
[ 5.859017@3] saradc c1108680.saradc: calibration end: coef=4112
[ 5.865132@1] remote: Driver init
[ 5.868298@1] remote: platform_data g_remote_ao_offset=580
[ 5.873686@1] remote: platform_data irq =228
[ 5.877927@1] remote: set drvdata completed
[ 5.882144@1] remote: device_create_file completed
[ 5.887295@1] input: aml_keypad as /devices/meson-remote.12/input/input0
[ 5.893899@3] remote: input_register_device completed
[ 5.898909@3] remote: set_remote_mode[78]
[ 5.902854@3] remote: remote config major:229
[ 5.907364@3] remote: physical address:0x263fc000
[ 5.912112@3] gpio-key gpio_keypad.46: gpio_key: 0 name(power) pin()
[ 5.918185@3] gpio-key gpio_keypad.46: amlogic_gpio_name_map_num pin 0!::
[ 5.924931@3] gpio-key gpio_keypad.46: gpio_key: 0 power(125)
[ 5.930630@3] gpio-key gpio_keypad.46: start setup_timer
[ 5.935872@3] gpio-key gpio_keypad.46: power key(116) registed.
[ 5.941855@3] input: gpio_keypad as /devices/gpio_keypad.46/input/input1
[ 5.948471@3] gpio-key gpio_keypad.46: gpio keypad register input device completed.
[ 5.955978@3] input input1: gpio keypad major:228
[ 5.964510@3] cpuinfo: probe done
[ 5.968285@3] input: cec_input as /devices/virtual/input/input2
[ 5.973852@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[ 5.979767@3] cectx aocec: aml_cec_probe(): no hhi reg resource
[ 5.985712@3] cectx aocec: aml_cec_probe(): can't find hdmirx
[ 5.992464@3] cec: wake up flag:0
[ 5.996602@3] aml-i2s-dai I2S.37: I2S Mic is in platform!
[ 6.000117@3] aml_pcm_dai: pcm mode detection =1
[ 6.005320@3] aml_snd_card: headphone detection disable=1
[ 6.009868@3] aml_snd_card: no spk event delay time set
[ 6.015532@3] aml_snd_m8_card aml_m8_snd.45: dummy <-> I2S.37 mapping ok
[ 6.021985@3] aml_snd_m8_card aml_m8_snd.45: dit-hifi <-> SPDIF.38 mapping ok
[ 6.028782@3] aml_pcm: enter aml_pcm_new dai->name: PCM.39 dai->id: 0
[ 6.035164@3] input input1: key 116 up
[ 6.038917@3] aml_snd_m8_card aml_m8_snd.45: pcm2bt-pcm <-> PCM.39 mapping ok
[ 6.053695@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
[ 6.062048@2] TCP: cubic registered
[ 6.065993@2] NET: Registered protocol family 10
[ 6.070516@2] NET: Registered protocol family 17
[ 6.074680@2] Key type dns_resolver registered
[ 6.079988@2] Registering SWP/SWPB emulation handler
[ 6.084419@2] regulator-dummy: disabling
[ 6.088057@2] console [netcon0] enabled
[ 6.091644@2] netconsole: network logging started
[ 6.096328@2] aml_vrtc rtc.29: setting system clock to 2015-01-01 00:00:10 UTC (1420070410)
[ 6.105469@2] cpufreq-scpi cpufreq-meson.7: enter cpufreq
[ 6.110027@2] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
[ 6.117241@2] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
[ 6.121669@2] gxbb_pm: enter meson_pm_probe!
[ 6.125739@2] gxbb_pm: meson_pm_probe done
[ 6.130194@2] cpucore_cooling_register, max_cpu_core_num:4
[ 6.150413@2] aml_istbt_dev_ready NULL
[ 6.150459@2] ALSA device list:
[ 6.151649@2] #0: AML-M8AUDIO
[ 6.155185@2] Freeing unused kernel memory: 912K (ffffffc0019f0000 - ffffffc001ad4000)
[ 6.190155@3] fb: Frame buffer memory assigned at
[ 6.190169@3] fb: 0, phy: 0x000000003e700000, vir:0xffffff8001a00000, size=24576K
[ 6.190169@3]
[ 6.190180@3] fb: ---------------clear fb0 memory ffffff8001a00000
[ 6.210667@3] fb: osd[0] canvas.idx =0x40
[ 6.210673@3] fb: osd[0] canvas.addr=0x3e700000
[ 6.210679@3] fb: osd[0] canvas.width=7680
[ 6.210683@3] fb: osd[0] canvas.height=3240
[ 6.210688@3] fb: osd[0] frame.width=1920
[ 6.210692@3] fb: osd[0] frame.height=1080
[ 6.225531@3] fb: osd[0] canvas.idx =0x40
[ 6.225533@3] fb: osd[0] canvas.addr=0x3e700000
[ 6.225535@3] fb: osd[0] canvas.width=7680
[ 6.225536@3] fb: osd[0] canvas.height=2160
[ 6.225538@3] fb: osd[0] frame.width=1920
[ 6.225540@3] fb: osd[0] frame.height=1080
[ 6.244036@3] fb: Frame buffer memory assigned at
[ 6.244050@3] fb: 1, phy: 0x000000003ff00000, vir:0xffffff8003280000, size=1024K
[ 6.244050@3]
[ 6.244059@3] fb: fb1 open, logo index:1
[ 6.275658@1] codec:free_alloced_keep_buffer (null). (null). (null)
[ 6.275912@1] vfm_map_store:rm default
[ 6.275912@1]
[ 6.276038@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 6.276038@1]
[ 6.276195@1] fb: osd[0] enable: 1 (platform_init)
[ 6.292343@1] fb: osd[1] enable: 0 (platform_init)
[ 6.358895@1] Console: switching to colour frame buffer device 240x67
[ 6.397739@1] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[ 6.900445@0] dwc_otg: Core Release: 3.10a
[ 6.900452@0] dwc_otg: Setting default values for core params
[ 6.900463@0] dwc_otg: curmode: 1, host_only: 1
[ 6.912631@0] dwc_otg: Using Buffer DMA mode
[ 6.912636@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 6.912640@0] dwc_otg: Working on port type = HOST
[ 6.913011@0] dwc_otg dwc2_b: DWC OTG Controller
[ 6.913029@0] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[ 6.913054@0] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[ 6.913058@0] dwc_otg: -------hcd->flags.d32 = 0
[ 6.913077@0] dwc_otg: Init: Port Power? op_state=1
[ 6.913080@0] dwc_otg: Init1: Power Port (0)
[ 6.913213@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.913219@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.913224@0] usb usb1: Product: DWC OTG Controller
[ 6.913228@0] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[ 6.913233@0] usb usb1: SerialNumber: dwc2_b
[ 6.913676@2] hub 1-0:1.0: USB hub found
[ 6.913698@2] hub 1-0:1.0: 1 port detected
[ 6.913867@2] dwc_otg: usb0: type: 1 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[ 6.925466@2] dwc_otg: Core Release: 3.10a
[ 6.925471@2] dwc_otg: Setting default values for core params
[ 6.925483@2] dwc_otg: curmode: 1, host_only: 1
[ 6.937647@2] dwc_otg: Using Buffer DMA mode
[ 6.937652@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 6.937656@2] dwc_otg: Working on port type = HOST
[ 6.937816@2] dwc_otg dwc2_a: DWC OTG Controller
[ 6.937832@2] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[ 6.937848@2] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[ 6.937852@2] dwc_otg: -------hcd->flags.d32 = 0
[ 6.937872@2] dwc_otg: Init: Port Power? op_state=1
[ 6.937875@2] dwc_otg: Init1: Power Port (0)
[ 6.937997@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.938003@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.938008@2] usb usb2: Product: DWC OTG Controller
[ 6.938012@2] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[ 6.938017@2] usb usb2: SerialNumber: dwc2_a
[ 6.938398@2] hub 2-0:1.0: USB hub found
[ 6.938416@2] hub 2-0:1.0: 1 port detected
[ 7.111660@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[ 7.149212@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.149212@2]
[ 7.172782@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.172782@0]
[ 7.185236@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.185236@2]
[ 7.198738@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.198738@3]
[ 7.200131@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.200131@3]
[ 7.201481@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.201481@3]
[ 7.203841@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.203841@3]
[ 7.206183@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.206183@3]
[ 7.211682@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.211682@3]
[ 7.225133@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.225133@1]
[ 7.267633@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 7.267633@2]
[ 7.291654@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 7.291903@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[ 7.492825@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 7.492835@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.492840@1] usb 1-1: Product: USB2.0 Hub
[ 7.493482@2] hub 1-1:1.0: USB hub found
[ 7.493765@2] hub 1-1:1.0: 4 ports detected
[ 8.273211@2] random: nonblocking pool is initialized
[ 8.880141@1] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 8.880683@1] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 8.907981@2] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 16.314931@1] systemd[1]: System time before build time, advancing clock.
[ 16.324289@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 16.324553@1] systemd[1]: Detected architecture arm64.
[ 16.324716@1] systemd[1]: Set hostname to <DISTRONAME>.
[ 16.391296@1] systemd[1]: Listening on udev Kernel Socket.
[ 16.391768@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 16.392070@1] systemd[1]: Listening on udev Control Socket.[ 16.392612@1] systemd[1]: Created slice User and Session Slice.
[ 16.392831@1] systemd[1]: Created slice System Slice.
[ 16.392899@1] systemd[1]: Reached target Slices.
[ 16.394018@1] systemd[1]: Mounting Variable Directory...
[ 16.395580@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[ 16.395609@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 16.396084@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 16.396203@1] systemd[1]: Reached target RPC Port Mapper.
[ 16.396409@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 16.396497@1] systemd[1]: Reached target Paths.
[ 16.396681@1] systemd[1]: Listening on Journal Socket (/dev/log).
[ 16.396847@1] systemd[1]: Listening on Journal Socket.
[ 16.398288@1] systemd[1]: Starting Samba Configuration...
[ 16.401673@1] systemd[1]: Starting Load Kernel Modules...
[ 16.404970@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 16.405445@1] systemd[1]: Reached target Swap.
[ 16.406996@1] systemd[1]: Mounting Temporary Directory...
[ 16.408832@1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 16.410753@1] systemd[1]: Mounting POSIX Message Queue File System...
[ 16.413016@1] systemd[1]: Starting Show Version...
[ 16.413298@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 16.415361@1] systemd[1]: Starting Setup machine-id...
[ 16.417140@1] systemd[1]: Mounting Debug File System...
[ 16.421159@1] systemd[1]: Mounted POSIX Message Queue File System.
[ 16.421302@1] systemd[1]: Mounted Variable Directory.
[ 16.421385@1] systemd[1]: Mounted Temporary Directory.
[ 16.426933@1] systemd[1]: Started Debug Shell on /dev/ttyS0.
[ 16.427882@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 16.428948@1] systemd[1]: Started Remount Root and Kernel File Systems.
[ 16.429893@1] systemd[1]: Mounted Debug File System.
[ 16.430647@1] systemd[1]: Started Show Version.
[ 16.434798@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 16.438040@1] systemd[1]: Starting udev Coldplug all Devices...
[ 16.440837@1] systemd[1]: Started Samba Configuration.
[ 16.441425@1] systemd[1]: Started Setup machine-id.
[ 16.443536@1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 16.445176@1] systemd[1]: Starting Journal Service...
[ 16.451211@3] media: Linux media interface: v0.10
[ 16.458730@1] systemd[1]: Started Create Static Device Nodes in /dev.
[ 16.459094@1] systemd[1]: Reached target Local File Systems (Pre).
[ 16.459191@1] systemd[1]: Reached target Local File Systems.
[ 16.459556@3] Linux video capture interface: v2.00
[ 16.459565@3] WARNING: You are using an experimental version of the media stack.
[ 16.459565@3] As the driver is backported to an older kernel, it doesn't offer
[ 16.459565@3] enough quality for its usage in production.
[ 16.459565@3] Use it with care.
[ 16.459565@3] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 16.459565@3] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 16.473205@2] amlvid:err: amlvideo_init called
[ 16.473215@2] amlvid:err: amlvideo_create_instance called
[ 16.473222@2] amlvid:err: v4l2_dev.name=:amlvideo-000
[ 16.473414@2] amlvideo-000: V4L2 device registered as video10
[ 16.482637@2] mali-utgard d00c0000.mali: set min pp to default 1
[ 16.482650@2] mali-utgard d00c0000.mali: set min clk default to 0
[ 16.482750@2] mali-utgard d00c0000.mali: max clk set 5
[ 16.482757@2] mali-utgard d00c0000.mali: turbo clk set to 6[ 16.484966@2] gpu cooling register okay with err=0
[ 16.485069@2] gpu core cooling register okay with err=0
[ 16.485341@2] Mali: Mali device driver loaded
[ 16.490607@1] systemd[1]: Started Load Kernel Modules.
[ 16.492222@1] systemd[1]: Mounting Configuration File System...
[ 16.493871@1] systemd[1]: Starting Apply Kernel Variables...
[ 16.496608@1] systemd[1]: Mounted Configuration File System.
[ 16.506654@1] systemd[1]: Started Apply Kernel Variables.
[ 16.532642@1] systemd[1]: Started Journal Service.
[ 16.548296@0] systemd-journald[1920]: Received request to flush runtime journal from PID 1
[ 17.255308@0] Triggered SDIO WiFi power on and bus rescan.
[ 17.255340@0] aml_wifi wifi.30: [extern_wifi_set_enable] WIFI Disable! 234
[ 17.264841@2] Console: switching to colour dummy device 80x25
[ 17.299142@0] remote: cur_mode = 0
[ 17.299162@0] remote: set_remote_mode[78]
[ 17.323096@0] remote: cur_mode = 0
[ 17.323114@0] remote: set_remote_mode[78]
[ 17.410136@3] WARNING: You are using an experimental version of the media stack.
[ 17.410136@3] As the driver is backported to an older kernel, it doesn't offer
[ 17.410136@3] enough quality for its usage in production.
[ 17.410136@3] Use it with care.
[ 17.410136@3] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 17.410136@3] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 17.441834@1] aml_dvb_init: aml dvb init
[ 17.442069@1] aml_dvb_probe: probe amlogic dvb driver
[ 17.442087@1] aml_dvb_probe: dmx rst ctl = ffffffc026cd1c40[ 17.442093@1] aml_dvb_probe: asyncfifo rst ctl = ffffffc026cd1b40
[ 17.442097@1] aml_dvb_probe: ahbarb0 rst ctl = ffffffc026cd19c0
[ 17.442102@1] aml_dvb_probe: uparsertop rst ctl = ffffffc026cd1d40
[ 17.442111@1] aml_dvb_probe: ts0: parallel
[ 17.442189@1] aml_dvb_probe: ts0_control: 0x0
[ 17.442195@1] dvbdev: DVB: registering new adapter (amlogic-dvb)
[ 17.442196@1] aml_dvb_probe: Registered adpter: amlogic-dvb[ 17.461857@3] aml_dvb_dmx_init: demux0
[ 17.480864@3] aml_dvb_dmx_init: demux1
[ 17.505548@3] aml_dvb_dmx_init: demux2
[ 17.508088@3] aml_dvb_asyncfifo_init: af:0 irq:51
[ 17.508134@3] DMX: async fifo 0 buf size 524288, flush size 262144
[ 17.508168@3] aml_dvb_asyncfifo_init: af:1 irq:57
[ 17.508190@3] DMX: async fifo 1 buf size 524288, flush size 262144
[ 17.521095@3] DVB FE: Init AVL6862 frontend 0
[ 17.538664@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.538664@2]
[ 17.538788@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.538788@0]
[ 17.539149@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.539149@3]
[ 17.539705@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.539705@0]
[ 17.540023@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.540023@3]
[ 17.542948@3] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.542948@3]
[ 17.561691@0] aml_wifi wifi.30: [extern_wifi_set_enable] WIFI Enable! 234
[ 17.564885@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.564885@1]
[ 17.565144@0] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.565144@0]
[ 17.566459@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.566459@2]
[ 17.571276@1] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.571276@1]
[ 17.574373@2] nandphy: blktrans_ioctl -cmd: 5331,80200204,64
[ 17.574373@2]
[ 17.821072@0] 8021q: 802.1Q VLAN Support v1.8
[ 17.872774@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 17.872788@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 17.872826@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 17.873879@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 17.873893@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 17.873921@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 17.878812@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 17.878824@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 17.878856@1] aml_sd_emmc_data_thread 2639 sdio: cmd:8
[ 17.896647@1] sdio: new high speed SDIO card at address 0001
[ 17.896660@0] sdio: clock 50000000, 4-bit-bus-width
[ 17.896660@0]
[ 17.900710@0] [sdio_reinit] finish
[ 17.927784@1] cfg80211: Calling CRDA to update world regulatory domain
[ 17.985801@1] RTL871X: module init start
[ 17.985817@1] RTL871X: rtl8189es v4.3.18.4_22798.20170620
[ 17.985820@1] ######platform_wifi_power_on:
[ 17.985846@1] aml_wifi wifi.30: [extern_wifi_set_enable] WIFI Disable! 234
[ 18.491594@1] aml_wifi wifi.30: [extern_wifi_set_enable] WIFI Enable! 234
[ 18.493387@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.493394@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x14
[ 18.526318@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.526325@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x14
[ 18.526332@0] i2c i2c-1: avl6862: i2c rd failed=-11 len=4
[ 18.684901@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.684908@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x14
[ 18.718440@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.718446@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x14
[ 18.718452@0] i2c i2c-1: avl6862: i2c rd failed=-11 len=4
[ 18.718457@0] i2c i2c-1: avl6862: attach failed reading id
[ 18.718473@0] DVB FE: avl6862_attach attach failed!!!
[ 19.001593@1] sdio_reset_comm():
[ 19.001662@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 19.001679@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 19.001712@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 19.001765@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 19.001777@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 19.001800@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 19.021692@1] [sdio_reinit] finish
[ 19.027625@1] bFWReady == _FALSE call reset 8051...
[ 19.054255@1] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=4c:0f:c7:2e:97:b2
[ 19.093433@1] RTL871X: module init ret=0
[ 19.412334@1] ==> rtl8188e_iol_efuse_patch
[ 19.717414@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.771846@0] libphy: stmmac-0:00 - Link is Up - 100/Full
[ 21.771923@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.497246@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 29.497303@1] aml_spdif_dai: share the same clock
[ 29.497312@1] aml_audio_hw: IEC958 PCM32
[ 29.497319@1] hdmitx: audio: aout notify rate 44100
[ 29.497323@1] hdmitx: audio: aout notify size 32
[ 29.497327@1] hdmitx: audio: aout notify format CT_PCM
[ 29.497331@1] hdmtix: set audio
[ 29.497346@1] hdmitx tx_aud_src = 0
[ 29.497373@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 29.497377@1] hdmitx aud_n_para = 6272
[ 29.497396@1] hdmitx set channel status
[ 29.497455@1] hdmitx: audio: Audio Type: PCM
[ 29.497459@1] hdmitx: audio: set audio param
[ 29.497468@1] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[ 29.497568@0] aml_snd_card: audio speaker on
[ 29.501788@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 29.501795@0] aml_spdif_dai: share the same clock
[ 29.501805@0] aml_audio_hw: IEC958 PCM32
[ 29.501811@0] hdmitx: audio: aout notify rate 44100
[ 29.501815@0] hdmitx: audio: aout notify size 32
[ 29.501818@0] hdmitx: audio: no update
[ 29.501826@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[ 29.501989@0] channel count should be 8, we got 2 aborting
[ 29.504731@0] aml_snd_m8_card aml_m8_snd.45: I2S playback enable
[ 29.504742@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback enable
[ 29.551983@1] codec:vdec_create instance ffffff8003907000, total 1
[ 29.611029@0] vout_serve: vmode set to null
[ 29.611061@0] fb: current vmode=1080p60hz, cmd: 0x50000
[ 29.611068@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[ 29.611073@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[ 29.611086@0] tv_vout: 3Invalid video output modes.
[ 29.611089@0] tv_vout: new mode =null set ok
[ 29.611092@0] vout_serve: vinfo mode is: null
[ 29.611096@0] vout_serve: new mode null set ok
[ 29.611107@0] hdmitx: edid: not find mapped vic
[ 29.611115@0] hdmitx: video: get current mode: null
[ 29.611118@0] hdmitx: update rx hdr info 0
[ 29.611122@0] hdmitx: update physcial size: 300 230
[ 29.611125@0] hdmitx: video: null not valid hdmi mode
[ 29.611147@0] fb: current vmode=null, cmd: 0x10000
[ 29.625627@0] hdmitx: set frac_rate_policy as 0
[ 29.625657@0] vout_serve: vmode set to 1080p60hz
[ 29.625677@0] vout_serve: disable HDMI PHY as soon as possible
[ 29.625683@0] fb: current vmode=null, cmd: 0x50000
[ 29.625689@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 29.625693@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 29.625704@0] tv_vout: TV mode 1080p60hz selected.
[ 29.625710@0]
[ 29.625710@0] vdac_enable: on:0,module_sel:8
[ 29.625719@0]
[ 29.625719@0] vdac_enable: on:0,module_sel:8
[ 29.625728@0] tv_vout: new mode =1080p60hz set ok
[ 29.625732@0] vout_serve: vinfo mode is: 1080p60hz
[ 29.625736@0] vout_serve: new mode 1080p60hz set ok
[ 29.625754@0] hdmitx: video: get current mode: 1080p60hz
[ 29.625757@0] hdmitx: update rx hdr info 0
[ 29.625760@0] hdmitx: update physcial size: 300 230
[ 29.625803@0] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 29.625808@0] hdmitx: rx no SCDC present indicator
[ 29.627819@0] hdmitx: ddc rd8b error 0x54 0x01
[ 29.629829@0] hdmitx: ddc rd8b error 0x54 0x01
[ 29.629835@0] hdmirx version is 1.4 or below
[ 29.629838@0] hdmitx div40: 0
[ 29.651600@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 29.651609@0] hdmitx: system: set pll
[ 29.651612@0] hdmitx: system: param->VIC:16
[ 29.651616@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
[ 29.651628@0] config HPLL = 2970000
[ 29.651650@0] HPLL: 0xc800023d
[ 29.651653@0] config HPLL done
[ 29.651661@0] set_hpll_od3_clk_div[437] div = 6
[ 29.651669@0] j = 4 vid_clk_div = 1
[ 29.651678@0] hdmitx: set enc for VIC: 16
[ 29.651694@0] hdmitx_set_hw[4947] set VIC = 16
[ 29.651904@0] hdmitx: system: irq 80000001
[ 29.663586@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 29.665598@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 29.667608@0] hdmitx: ddc rd8b error 0x54 0x21
[ 29.667631@0] Start = 0x10000100 End = 0x100001ff
[ 29.667642@0] [0x10000104]: 0x00000001
[ 29.667818@0] [0x10000180]: 0x000000ff
[ 29.667823@0] [0x10000181]: 0x000000ff
[ 29.667827@0] [0x10000182]: 0x00000003
[ 29.667831@0] [0x10000183]: 0x00000007
[ 29.667836@0] [0x10000184]: 0x0000003f
[ 29.667840@0] [0x10000185]: 0x00000002
[ 29.667846@0] [0x10000187]: 0x000000ff
[ 29.667850@0] [0x10000188]: 0x00000003
[ 29.783586@1] hdmitx: system: PHY Setting Done
[ 29.787609@1] Sink is HDMI device
[ 29.787655@1] 1080p60hz 60 1
[ 29.787661@1] 1080p60hz 60 1
[ 29.787665@1] hdmtix: set audio
[ 29.787675@1] hdmitx tx_aud_src = 0
[ 29.787702@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 29.787706@1] hdmitx aud_n_para = 6272
[ 29.787724@1] hdmitx set channel status
[ 29.787784@1] hdmitx: audio: Audio Type: PCM
[ 29.787792@1] fb: current vmode=1080p60hz, cmd: 0x10000
[ 29.835847@3] fb: osd[0] enable: 1 (kodi.bin)
[ 52.226374@2] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[ 52.406254@3] usb 2-1: new high-speed USB device number 2 using dwc_otg
[ 52.406412@3] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[ 52.608920@1] usb 2-1: New USB device found, idVendor=045e, idProduct=02d5
[ 52.609040@1] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 52.609117@1] usb 2-1: Product: Xbox USB Tuner
[ 52.609187@1] usb 2-1: Manufacturer: Microsoft Corp.
[ 52.609256@1] usb 2-1: SerialNumber: 002496160615
[ 52.681109@0] WARNING: You are using an experimental version of the media stack.
[ 52.681109@0] As the driver is backported to an older kernel, it doesn't offer
[ 52.681109@0] enough quality for its usage in production.
[ 52.681109@0] Use it with care.
[ 52.681109@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 52.681109@0] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 52.694004@0] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold state, will try to load a firmware
[ 52.696471@0] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 52.760163@0] dib0700: firmware started successfully.
[ 53.266494@3] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in warm state.
[ 53.268378@0] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 53.268471@0] dvbdev: DVB: registering new adapter (Microsoft Xbox One Digital TV Tuner)
[ 53.268488@0] usb 2-1: media controller created
[ 53.269445@0] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 53.472443@0] mn88472 5-0018: Panasonic MN88472 successfully identified
[ 53.480584@3] tda18250 5-0060: NXP TDA18250BHN/M successfully identified
[ 53.482176@3] usb 2-1: DVB: registering adapter 1 frontend 0 (Panasonic MN88472)...
[ 53.482202@3] dvbdev: dvb_create_media_entity: media entity 'Panasonic MN88472' registered.
[ 53.483228@3] dvb-usb: Microsoft Xbox One Digital TV Tuner successfully initialized and connected.
[ 53.483442@3] usbcore: registered new interface driver dvb_usb_dib0700
[ 53.572861@3] mn88472 5-0018: downloading firmware from file 'dvb-demod-mn88472-02.fw'
[ 53.728342@3] usb 2-1: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000)
[ 100.649713@0] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
[ 100.649770@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
[ 100.654174@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 100.654210@0] aml_spdif_dai: share the same clock
[ 100.654248@0] aml_audio_hw: IEC958 PCM32
[ 100.654277@0] hdmitx: audio: aout notify rate 44100
[ 100.654296@0] hdmitx: audio: aout notify size 32
[ 100.654315@0] hdmitx: audio: no update
[ 100.654346@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[ 105.156796@0] usb 1-1.1: new low-speed USB device number 3 using dwc_otg
[ 105.273148@0] usb 1-1.1: New USB device found, idVendor=04d9, idProduct=a01c
[ 105.273198@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 105.273228@0] usb 1-1.1: Product: Wireless USB Device
[ 105.273256@0] usb 1-1.1: Manufacturer: HOLTEK
[ 105.327492@2] input: HOLTEK Wireless USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.0/0003:04D9:A01C.0001/input/input4
[ 105.328304@2] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-dwc2_b-1.1/input0
[ 105.347574@2] input: HOLTEK Wireless USB Device as /devices/dwc2_b/usb1/1-1/1-1.1/1-1.1:1.1/0003:04D9:A01C.0002/input/input5
[ 105.348624@2] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-dwc2_b-1.1/input1
[ 115.658394@1] aml_snd_card: audio speaker off
LibreELEC:~ # uname -r 3.14.29
LibreELEC:~ #