Přihlásit se na XBMC-Kodi.cz

Deniel33 · 08.4.2019, 22:57

plesi
no poradil my a poďakoval mi. Ver mi že som hľadal na google a fórach, ale človek sa musí aj inteligentne vedieť opýtať toho googlu čo hľadá. No a mňa to asi obišlo a nenašiel som.

Deniel33 · 09.4.2019, 7:56

Ahojte,

prosím o radu, mám v KODI naištalovaný TVHEADEND a neviem sa z PC nanho pripojiť.
ip adresa KODI je 192.168.1.100 a kedď v PC prehliadači dám adresu HTTP://192.168.1.100:9981 napíše že stránka je nedostupná.

pozeral som už rôzne návody, ale tomuto sa nejako nevenujú. Každému to ide.

na KODI sa viem normálne prihlásiť z prehliadača: 192.168.1.100:8080 toto mi ide takže v nejakom firewall alebo podobne to nebude.

plesi · (Tento příspěvek byl naposledy změněn: 09.4.2019, 8:35 uživatelem plesi.)

Ono záleží zda jsi jen neinstaloval klienta PVR (tedy jen "Tvheadend HTSP Client")
Klikni na Systém/Doplňky/Moje doplňky/Služby a zde uvidíš "TVheadend Server 4.2"
Jestli ve službách nic nevidíš instaluj takto:
Klikni na Systém/Doplňky/Instalovat z repozitáře/LibreElec Add-ons/Služby/ a zde si najdi "Tvheadend Server 4.2.
Pak už jen zadej ve webovém prohlížeči svou IP adresu 192.168.1.100:9981
Jestli zadáváš IP adresu třeba na telefonu,tak nezapomeň,že musíš být připojen na svou domácí síť (WIFI).

Deniel33 · 09.4.2019, 8:33

Nie naistaloval som len Tvheadend server. Client nie je na to aby som sa pripojil z TVheadend na server v inom zdroji. Napríklad do synology kde je TVheadent server? Či?

supperka · 09.4.2019, 8:33

Pokud je IP. Tvého kodi 192.168.1.100 a nejde se ti přihlásit do TVheadendu tak pravděpodobně ho nemáš dobře nainstalovaný nebo ho máš pozastaveny. Návod totiž jednoduchý z libreelec repozitare nainstalovat TVheadendu, musí to vyskočit že byl nainstalován nový doplněk a pak už jen přes IP vše nastavujes.

Client · (Tento příspěvek byl naposledy změněn: 09.4.2019, 8:47 uživatelem Client.)

@Deniel33 Při takovémto dotazu bys měl vysypat další údaje. To se těžko radí. Patrně to bude asi nějaký *ELEC, když píšeš "mám v KODI naištalovaný TVHEADEND". Jinak, to že ti projde 192.168.1.100:8080 ještě nutně automaticky neznamená, že projde i 192.168.1.100:9981. Ale je fakt, že je to málo pravděpodobné. Mimochodem, jsi si jistý, že ti Tvheadend skutečně běží?

@supperka Pozor, Tvheadend není addon Kodi. Používá pouze mechanismu instalace Kodi addons a zadání pár parametrů. Ale jinak je to zcela samostatná úloha, na Kodi nezávislá. Takže to, že ti Kodi napíše, že byl doplněk nainstalovaný, ještě nutně neznamená, že i běží.

plesi · 09.4.2019, 8:49

Dobré je také restartovat a nebo alespoň zakazat a opet povolit doplněk Tvheadend server;-) Po restartu opet mrkni na IP tvého tv boxu.

Deniel33 · 09.4.2019, 16:31

Ahojte, takže skúsil som odinštalovať a znovu nainštalovať tvheadend. Už mi to ide, ale som sa zasekol pri skenovaní kanálov. Postupoval som podľa návodu :https://www.xbmc-kodi.cz/prispevek-zakladni-konfigurace-tvheadendu-pro-dvb-t-t2

Keď dám na Vynútiť skenovanie tak v záložkách "stav" nič nevidím. Nič sa nestane.
V záložke "Stav" "stream" píše vid obrázok
Ostatné záložky sú prázdne.

plesi

Astrometa je funkční,ale zatím jen s demodulátorem od Panasonic MN88473 (2).
[Obrázek: cfa67f692673a0aecaa4e027b43d35e3e75e2c7a.jpg]

Jestli máš Sony CXD-2837ER,tak ten si nech jen pro Windows.
https://www.linuxtv.org/wiki/index.php/Astrometa_DVB-T2

Pomohl by výpis "dmesg" a nebo ho připoj do PC s Windows a jukni na správce zařízení.

Máš ještě nějaký USB tuner?

Pro začátečníka je lepší spustit průvodce nastavením "Start wizard"
Mrkni na obrázky třeba zde:
http://lukbe.blogspot.com/2018/03/raspbi...i.html?m=1

Deniel33

No mne sa tam zobrazí iba jeden tuner a to ten realtek DVB-T ostatné tam nemám.

Tieto kanály sa mi podarilo nájsť, skúsil som presunúť anténu. Vid príloha

Takže na tejto astromete (mam verziu DVB-T/T2/C) mi nepôjde príjem DVB-T na slovensku.
Vedel by som odskúšať aj príjem na DVB-C mám doma UPC a dosť kanálov tam je zdarma.

Ďakujem

Chlapy, už to jed, problém je asi v slabom signály DVB-T.

Mám ale dotaz, ako dokážem naladit DVB-C signál. Mám doma UPC a na telke fičí bez problémov.
Ďakujem

plesi · 09.4.2019, 18:20

Na malou anténku se vyprdni.
Spusť si pruvodce nastavením a tam to uvidíš. (Snad) :-D

Deniel33 · 09.4.2019, 18:30

plesi

prečo ale medzi tunermi nevidím DVB-C mám astrometa ktorá ho má.
Musí byť do tuneru privedený signál aby to rozpoznal?

plesi

Dokuď neuvidím výpis co máš za tuner a zda máš v Libreelec FW,tak ti moc neporadím.

Připoj se z PC na Libreelec přes SSH pomoci programu "PuTTY"
Info zde:
https://wiki.libreelec.tv/accessing_libreelec
Jméno:root
Heslo:libreelec

Zadej příkaz : "dmesg" (bez uvozovek) a zkopíruj sem výpis co ti to napíše.

Deniel33

Kód:
[    0.135549] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4

[    0.135550] Spectre V2 : Mitigation: Full generic retpoline

[    0.135551] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[    0.135551] Spectre V2 : Enabling Restricted Speculation for firmware calls

[    0.135557] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[    0.135557] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl

[    0.135558] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp

[    0.135761] Freeing SMP alternatives memory: 52K

[    0.139411] TSC deadline timer enabled

[    0.139416] smpboot: CPU0: Intel(R) Core(TM) i3-8109U CPU @ 3.00GHz (family: 0x6, model: 0x8e, stepping: 0xa)

[    0.139479] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.

[    0.139507] ... version:                4

[    0.139507] ... bit width:              48

[    0.139508] ... generic registers:      4

[    0.139508] ... value mask:             0000ffffffffffff

[    0.139509] ... max period:             00007fffffffffff

[    0.139509] ... fixed-purpose events:   3

[    0.139510] ... event mask:             000000070000000f

[    0.139543] rcu: Hierarchical SRCU implementation.

[    0.140680] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.140709] smp: Bringing up secondary CPUs ...

[    0.140755] x86: Booting SMP configuration:

[    0.140756] .... node  #0, CPUs:      #1 #2 #3

[    0.141185] smp: Brought up 1 node, 4 CPUs

[    0.141185] smpboot: Max logical packages: 1

[    0.141185] smpboot: Total of 4 processors activated (24009.00 BogoMIPS)

[    0.141894] devtmpfs: initialized

[    0.141894] PM: Registering ACPI NVS region [mem 0x7a2ed000-0x7a374fff] (557056 bytes)

[    0.141894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.141894] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.141894] xor: automatically using best checksumming function   avx

[    0.141894] pinctrl core: initialized pinctrl subsystem

[    0.141996] NET: Registered protocol family 16

[    0.142129] cpuidle: using governor ladder

[    0.142131] cpuidle: using governor menu

[    0.142170] KVM setup pv remote TLB flush

[    0.142170] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.142170] ACPI: bus type PCI registered

[    0.142170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.142170] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.142170] PCI: Using configuration type 1 for base access

[    0.201745] raid6: sse2x1   gen() 10630 MB/s

[    0.258412] raid6: sse2x1   xor()  7900 MB/s

[    0.315076] raid6: sse2x2   gen() 13033 MB/s

[    0.371745] raid6: sse2x2   xor()  9014 MB/s

[    0.428412] raid6: sse2x4   gen() 15234 MB/s

[    0.485078] raid6: sse2x4   xor()  9547 MB/s

[    0.541743] raid6: avx2x1   gen() 21186 MB/s

[    0.598411] raid6: avx2x1   xor() 15351 MB/s

[    0.655077] raid6: avx2x2   gen() 25381 MB/s

[    0.711743] raid6: avx2x2   xor() 16883 MB/s

[    0.768410] raid6: avx2x4   gen() 29614 MB/s

[    0.825083] raid6: avx2x4   xor() 17763 MB/s

[    0.825084] raid6: using algorithm avx2x4 gen() 29614 MB/s

[    0.825084] raid6: .... xor() 17763 MB/s, rmw enabled

[    0.825088] raid6: using avx2x2 recovery algorithm

[    0.825127] ACPI: Added _OSI(Module Device)

[    0.825128] ACPI: Added _OSI(Processor Device)

[    0.825128] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.825129] ACPI: Added _OSI(Processor Aggregator Device)

[    0.825130] ACPI: Added _OSI(Linux-Dell-Video)

[    0.825131] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[    0.876142] ACPI: 9 ACPI AML tables successfully acquired and loaded

[    0.889485] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked

[    0.890704] ACPI: Dynamic OEM Table Load:

[    0.890709] ACPI: SSDT 0xFFFF9F7BB4122800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)

[    0.891108] ACPI: Dynamic OEM Table Load:

[    0.891113] ACPI: SSDT 0xFFFF9F7BB414A800 000735 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)

[    0.891571] ACPI: Dynamic OEM Table Load:

[    0.891575] ACPI: SSDT 0xFFFF9F7BB413DA00 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)

[    0.891883] ACPI: Dynamic OEM Table Load:

[    0.891887] ACPI: SSDT 0xFFFF9F7BB414B000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)

[    0.892477] ACPI: Dynamic OEM Table Load:

[    0.892483] ACPI: SSDT 0xFFFF9F7BB5567000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)

[    0.893345] ACPI: Dynamic OEM Table Load:

[    0.893349] ACPI: SSDT 0xFFFF9F7BB4123000 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)

[    0.893726] ACPI: Dynamic OEM Table Load:

[    0.893730] ACPI: SSDT 0xFFFF9F7BB4123400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)

[    0.895483] ACPI: EC: EC started

[    0.895484] ACPI: EC: interrupt blocked

[    0.895510] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC

[    0.895512] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.895513] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions

[    0.895514] ACPI: Interpreter enabled

[    0.895541] ACPI: (supports S0 S3 S5)

[    0.895542] ACPI: Using IOAPIC for interrupt routing

[    0.895574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.896533] ACPI: Enabled 7 GPEs in block 00 to 7F

[    0.907689] ACPI: Power Resource [USBC] (on)

[    0.910787] ACPI: Power Resource [V0PR] (on)

[    0.911015] ACPI: Power Resource [V1PR] (on)

[    0.911015] ACPI: Power Resource [V2PR] (on)

[    0.919723] ACPI: Power Resource [WRST] (on)

[    0.923625] ACPI: Power Resource [FN00] (off)

[    0.923696] ACPI: Power Resource [FN01] (off)

[    0.923764] ACPI: Power Resource [FN02] (off)

[    0.923831] ACPI: Power Resource [FN03] (off)

[    0.923898] ACPI: Power Resource [FN04] (off)

[    0.924622] ACPI: Power Resource [PIN] (off)

[    0.925028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

[    0.925032] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.925758] acpi PNP0A08:00: _OSC: platform does not support [AER]

[    0.927051] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]

[    0.927052] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration

[    0.927334] PCI host bridge to bus 0000:00

[    0.927336] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.927338] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.927339] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.927340] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[    0.927341] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]

[    0.927342] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]

[    0.927343] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]

[    0.927344] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]

[    0.927345] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]

[    0.927347] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]

[    0.927348] pci_bus 0000:00: root bus resource [bus 00-fe]

[    0.927356] pci 0000:00:00.0: [8086:3ecc] type 00 class 0x060000

[    0.927691] pci 0000:00:02.0: [8086:3ea5] type 00 class 0x030000

[    0.927703] pci 0000:00:02.0: reg 0x10: [mem 0x604b000000-0x604bffffff 64bit]

[    0.927709] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]

[    0.927713] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]

[    0.927727] pci 0000:00:02.0: BAR 2: assigned to efifb

[    0.927881] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000

[    0.927895] pci 0000:00:08.0: reg 0x10: [mem 0x604c11a000-0x604c11afff 64bit]

[    0.928075] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000

[    0.928099] pci 0000:00:12.0: reg 0x10: [mem 0x604c119000-0x604c119fff 64bit]

[    0.928305] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330

[    0.928325] pci 0000:00:14.0: reg 0x10: [mem 0x604c100000-0x604c10ffff 64bit]

[    0.928386] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.928736] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000

[    0.928759] pci 0000:00:14.2: reg 0x10: [mem 0x604c114000-0x604c115fff 64bit]

[    0.928770] pci 0000:00:14.2: reg 0x18: [mem 0x604c118000-0x604c118fff 64bit]

[    0.928983] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000

[    0.929092] pci 0000:00:14.3: reg 0x10: [mem 0x604c110000-0x604c113fff 64bit]

[    0.929487] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold

[    0.929672] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000

[    0.929699] pci 0000:00:16.0: reg 0x10: [mem 0x604c117000-0x604c117fff 64bit]

[    0.929777] pci 0000:00:16.0: PME# supported from D3hot

[    0.929981] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601

[    0.930000] pci 0000:00:17.0: reg 0x10: [mem 0xaeb24000-0xaeb25fff]

[    0.930007] pci 0000:00:17.0: reg 0x14: [mem 0xaeb27000-0xaeb270ff]

[    0.930015] pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]

[    0.930022] pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]

[    0.930030] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]

[    0.930037] pci 0000:00:17.0: reg 0x24: [mem 0xaeb26000-0xaeb267ff]

[    0.930080] pci 0000:00:17.0: PME# supported from D3hot

[    0.930270] pci 0000:00:1c.0: [8086:9db8] type 01 class 0x060400

[    0.930347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.930531] pci 0000:00:1c.4: [8086:9dbc] type 01 class 0x060400

[    0.930618] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[    0.930808] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400

[    0.930885] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[    0.931071] pci 0000:00:1d.6: [8086:9db6] type 01 class 0x060400

[    0.931152] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold

[    0.931327] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100

[    0.931662] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380

[    0.931720] pci 0000:00:1f.3: reg 0x10: [mem 0xaeb20000-0xaeb23fff 64bit]

[    0.931778] pci 0000:00:1f.3: reg 0x20: [mem 0x604c000000-0x604c0fffff 64bit]

[    0.931891] pci 0000:00:1f.3: PME# supported from D3hot D3cold

[    0.932499] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500

[    0.932527] pci 0000:00:1f.4: reg 0x10: [mem 0x604c116000-0x604c1160ff 64bit]

[    0.932556] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]

[    0.932720] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000

[    0.932737] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]

[    0.932904] pci 0000:00:1f.6: [8086:15be] type 00 class 0x020000

[    0.932950] pci 0000:00:1f.6: reg 0x10: [mem 0xaeb00000-0xaeb1ffff]

[    0.933140] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold

[    0.933301] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.933344] pci 0000:00:1c.4: PCI bridge to [bus 02-6c]

[    0.933349] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0xae0fffff]

[    0.933353] pci 0000:00:1c.4:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]

[    0.933390] pci 0000:00:1d.0: PCI bridge to [bus 6d]

[    0.933514] pci 0000:6e:00.0: [10ec:522a] type 00 class 0xff0000

[    0.933542] pci 0000:6e:00.0: reg 0x10: [mem 0xae100000-0xae100fff]

[    0.933674] pci 0000:6e:00.0: supports D1 D2

[    0.933676] pci 0000:6e:00.0: PME# supported from D1 D2 D3hot D3cold

[    0.933832] pci 0000:00:1d.6: ASPM: current common clock configuration is broken, reconfiguring

[    0.941888] pci 0000:00:1d.6: PCI bridge to [bus 6e]

[    0.941891] pci 0000:00:1d.6:   bridge window [io  0x3000-0x3fff]

[    0.941893] pci 0000:00:1d.6:   bridge window [mem 0xae100000-0xaeafffff]

[    0.941897] pci 0000:00:1d.6:   bridge window [mem 0x604a100000-0x604aafffff 64bit pref]

[    0.943086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943121] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1

[    0.943154] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943219] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943284] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943316] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0

[    0.943824] ACPI: EC: interrupt unblocked

[    0.943850] ACPI: EC: event unblocked

[    0.943867] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.943868] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events

[    0.943924] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.943924] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.943924] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.943924] vgaarb: loaded

[    0.943924] SCSI subsystem initialized

[    0.943924] libata version 3.00 loaded.

[    0.943924] ACPI: bus type USB registered

[    0.943924] usbcore: registered new interface driver usbfs

[    0.943924] usbcore: registered new interface driver hub

[    0.943924] usbcore: registered new device driver usb

[    0.943924] pps_core: LinuxPPS API ver. 1 registered

[    0.943924] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.943924] PTP clock support registered

[    0.943924] Registered efivars operations

[    0.961921] Advanced Linux Sound Architecture Driver Initialized.

[    0.961921] PCI: Using ACPI for IRQ routing

[    0.992929] PCI: pci_cache_line_size set to 64 bytes

[    0.993151] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]

[    0.993152] e820: reserve RAM buffer [mem 0x6dc5e018-0x6fffffff]

[    0.993153] e820: reserve RAM buffer [mem 0x79e10000-0x7bffffff]

[    0.993154] e820: reserve RAM buffer [mem 0x7ad0f000-0x7bffffff]

[    0.993155] e820: reserve RAM buffer [mem 0x27e000000-0x27fffffff]

[    0.993307] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)

[    0.993334] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)

[    0.993465] clocksource: Switched to clocksource tsc-early

[    1.001328] FS-Cache: Loaded

[    1.001340] pnp: PnP ACPI init

[    1.001638] system 00:00: [io  0x0a00-0x0a1f] has been reserved

[    1.001640] system 00:00: [io  0x0a20-0x0a2f] has been reserved

[    1.001641] system 00:00: [io  0x0a30-0x0a3f] has been reserved

[    1.001642] system 00:00: [io  0x0a40-0x0a4f] has been reserved

[    1.001643] system 00:00: [io  0x0a50-0x0a5f] has been reserved

[    1.001645] system 00:00: [io  0x0a60-0x0a6f] has been reserved

[    1.001649] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.002426] pnp 00:01: [dma 0 disabled]

[    1.002449] pnp 00:01: Plug and Play ACPI device, IDs ITE8708 (active)

[    1.002535] system 00:02: [io  0x0680-0x069f] has been reserved

[    1.002537] system 00:02: [io  0x164e-0x164f] has been reserved

[    1.002540] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.002556] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[    1.002627] system 00:04: [io  0x1854-0x1857] has been reserved

[    1.002630] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    1.002789] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved

[    1.002791] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved

[    1.002792] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved

[    1.002793] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved

[    1.002795] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved

[    1.002796] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved

[    1.002797] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved

[    1.002799] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved

[    1.002801] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.002974] system 00:06: [io  0x1800-0x18fe] could not be reserved

[    1.002976] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved

[    1.002977] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved

[    1.002979] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved

[    1.002980] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved

[    1.002981] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved

[    1.002982] system 00:06: [mem 0xff000000-0xffffffff] has been reserved

[    1.002985] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.003216] system 00:07: [io  0x2000-0x20fe] has been reserved

[    1.003219] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.004031] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    1.004609] pnp: PnP ACPI: found 9 devices

[    1.009981] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    1.010013] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 02-6c] add_size 1000

[    1.010031] pci 0000:00:1c.4: BAR 7: assigned [io  0x5000-0x5fff]

[    1.010033] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    1.010045] pci 0000:00:1c.4: PCI bridge to [bus 02-6c]

[    1.010048] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]

[    1.010052] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0xae0fffff]

[    1.010055] pci 0000:00:1c.4:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]

[    1.010059] pci 0000:00:1d.0: PCI bridge to [bus 6d]

[    1.010069] pci 0000:00:1d.6: PCI bridge to [bus 6e]

[    1.010071] pci 0000:00:1d.6:   bridge window [io  0x3000-0x3fff]

[    1.010074] pci 0000:00:1d.6:   bridge window [mem 0xae100000-0xaeafffff]

[    1.010077] pci 0000:00:1d.6:   bridge window [mem 0x604a100000-0x604aafffff 64bit pref]

[    1.010082] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    1.010083] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    1.010084] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    1.010085] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]

[    1.010086] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]

[    1.010088] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]

[    1.010089] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]

[    1.010090] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]

[    1.010091] pci_bus 0000:00: resource 12 [mem 0x4000000000-0x7fffffffff window]

[    1.010092] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]

[    1.010094] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]

[    1.010095] pci_bus 0000:02: resource 1 [mem 0x80000000-0xae0fffff]

[    1.010096] pci_bus 0000:02: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]

[    1.010097] pci_bus 0000:6e: resource 0 [io  0x3000-0x3fff]

[    1.010098] pci_bus 0000:6e: resource 1 [mem 0xae100000-0xaeafffff]

[    1.010099] pci_bus 0000:6e: resource 2 [mem 0x604a100000-0x604aafffff 64bit pref]

[    1.010226] NET: Registered protocol family 2

[    1.010324] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)

[    1.010349] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    1.010468] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    1.010682] TCP: Hash tables configured (established 65536 bind 65536)

[    1.010712] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    1.010742] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    1.010816] NET: Registered protocol family 1

[    1.010903] RPC: Registered named UNIX socket transport module.

[    1.010904] RPC: Registered udp transport module.

[    1.010904] RPC: Registered tcp transport module.

[    1.010905] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.010912] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    1.011315] PCI: CLS 64 bytes, default 64

[    1.043631] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.043635] software IO TLB: mapped [mem 0x73af3000-0x77af3000] (64MB)

[    1.043740] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer

[    1.043741] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[    1.043741] RAPL PMU: hw unit of domain package 2^-14 Joules

[    1.043742] RAPL PMU: hw unit of domain dram 2^-14 Joules

[    1.043742] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[    1.043743] RAPL PMU: hw unit of domain psys 2^-14 Joules

[    1.043854] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns

[    1.043864] clocksource: Switched to clocksource tsc

[    1.044054] Scanning for low memory corruption every 60 seconds

[    1.044410] Initialise system trusted keyrings

[    1.044439] workingset: timestamp_bits=40 max_order=21 bucket_order=0

[    1.045618] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    1.045641] FS-Cache: Netfs 'nfs' registered for caching

[    1.045718] NFS: Registering the id_resolver key type

[    1.045722] Key type id_resolver registered

[    1.045722] Key type id_legacy registered

[    1.045724] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[    1.045779] FS-Cache: Netfs 'cifs' registered for caching

[    1.258402] Key type asymmetric registered

[    1.258403] Asymmetric key parser 'x509' registered

[    1.258415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)

[    1.258417] io scheduler noop registered

[    1.258436] io scheduler cfq registered (default)

[    1.258437] io scheduler mq-deadline registered

[    1.258437] io scheduler kyber registered

[    1.258463] io scheduler bfq registered

[    1.259173] pcieport 0000:00:1c.0: Signaling PME with IRQ 120

[    1.259198] pcieport 0000:00:1c.4: Signaling PME with IRQ 121

[    1.259225] pcieport 0000:00:1d.0: Signaling PME with IRQ 122

[    1.259248] pcieport 0000:00:1d.6: Signaling PME with IRQ 123

[    1.259264] efifb: probing for efifb

[    1.259272] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k

[    1.259273] efifb: mode is 1920x1080x32, linelength=7680, pages=1

[    1.259274] efifb: scrolling: redraw

[    1.259275] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[    1.262487] Console: switching to colour frame buffer device 240x67

[    1.265616] fb0: EFI VGA frame buffer device

[    1.265623] intel_idle: MWAIT substates: 0x11142120

[    1.265624] intel_idle: v0.4.1 model 0x8E

[    1.265770] intel_idle: lapic_timer_reliable_states 0xffffffff

[    1.265844] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0

[    1.265851] ACPI: Sleep Button [SLPB]

[    1.265875] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[    1.265879] ACPI: Power Button [PWRB]

[    1.265903] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[    1.265922] ACPI: Power Button [PWRF]

[    1.316035] thermal LNXTHERM:00: registered as thermal_zone0

[    1.316036] ACPI: Thermal Zone [TZ0] (-263 C)

[    1.365435] thermal LNXTHERM:01: registered as thermal_zone1

[    1.365437] ACPI: Thermal Zone [TZ00] (28 C)

[    1.365690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.366380] Linux agpgart interface v0.103

[    1.366414] [drm] radeon kernel modesetting enabled.

[    1.366481] [drm] amdgpu kernel modesetting enabled.

[    1.366758] [drm] Found 128MB of eDRAM

[    1.367144] checking generic (4000000000 7e9000) vs hw (4000000000 10000000)

[    1.367144] fb: switching to inteldrmfb from EFI VGA

[    1.367158] Console: switching to colour dummy device 80x25

[    1.367282] [drm] Replacing VGA console driver

[    1.368274] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    1.368274] [drm] Driver supports precise vblank timestamp query.

[    1.369080] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    1.369516] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    1.642402] [drm] failed to retrieve link info, disabling eDP

[    1.733041] random: fast init done

[    1.932288] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0

[    1.933581] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    1.933872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3

[    1.935096] brd: module loaded

[    1.935110] loop: module loaded

[    1.938198] usbcore: registered new interface driver rtsx_usb

[    1.938233] Loading iSCSI transport class v2.0-870.

[    1.938319] iscsi: registered transport (tcp)

[    1.938319] megasas: 07.706.03.00-rc1

[    1.938476] ahci 0000:00:17.0: version 3.0

[    1.948771] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x6 impl SATA mode

[    1.948774] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst

[    1.949072] scsi host0: ahci

[    1.949145] scsi host1: ahci

[    1.949212] scsi host2: ahci

[    1.949237] ata1: DUMMY

[    1.949242] ata2: SATA max UDMA/133 abar m2048@0xaeb26000 port 0xaeb26180 irq 126

[    1.949243] ata3: SATA max UDMA/133 abar m2048@0xaeb26000 port 0xaeb26200 irq 126

[    1.949517] tun: Universal TUN/TAP device driver, 1.6

[    1.949553] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de

[    1.949566] Atheros(R) L2 Ethernet Driver - version 2.2.3

[    1.949567] Copyright (c) 2007 Atheros Corporation.

[    1.949608] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)

[    1.949630] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)

[    1.949637] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI

[    1.949638] e100: Copyright(c) 1999-2006 Intel Corporation

[    1.949646] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI

[    1.949647] e1000: Copyright (c) 1999-2006 Intel Corporation.

[    1.949655] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

[    1.949655] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[    1.949868] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

[    2.003247] fbcon: inteldrmfb (fb0) is primary device

[    2.101396] Console: switching to colour frame buffer device 240x67

[    2.121467] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    2.262101] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.262242] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.264755] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[    2.264757] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[    2.264758] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[    2.265373] ata3.00: ATA-10: WDC WD20SPZX-00UA7T0, 01.01A01, max UDMA/133

[    2.265374] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[    2.266487] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[    2.266489] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[    2.266491] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[    2.266515] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[    2.266517] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[    2.266518] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[    2.267488] ata3.00: configured for UDMA/133

[    2.274734] ata2.00: ATA-9: TS120GMTS420S, R0522A0, max UDMA/133

[    2.274736] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA

[    2.285493] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[    2.285496] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[    2.285497] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[    2.296605] ata2.00: configured for UDMA/133

[    2.296777] scsi 1:0:0:0: Direct-Access     ATA      TS120GMTS420S    2A0  PQ: 0 ANSI: 5

[    2.297029] sd 1:0:0:0: Attached scsi generic sg0 type 0

[    2.297218] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20SPZX-00U 1A01 PQ: 0 ANSI: 5

[    2.297295] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)

[    2.297309] sd 1:0:0:0: [sda] Write Protect is off

[    2.297311] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.297332] sd 2:0:0:0: Attached scsi generic sg1 type 0

[    2.297334] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.297409] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)

[    2.297411] sd 2:0:0:0: [sdb] 4096-byte physical blocks

[    2.297422] sd 2:0:0:0: [sdb] Write Protect is off

[    2.297424] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    2.297443] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.298964]  sda: sda1 sda2

[    2.299157] sd 1:0:0:0: [sda] Attached SCSI disk

[    2.378015] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock

[    2.406099]  sdb: sdb1

[    2.406571] sd 2:0:0:0: [sdb] Attached SCSI disk

[    2.467643] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 94:c6:91:a9:b5:5b

[    2.467645] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection

[    2.467768] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF

[    2.467789] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k

[    2.467789] igb: Copyright (c) 2007-2014 Intel Corporation.

[    2.467805] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k

[    2.467806] ixgbe: Copyright (c) 1999-2016 Intel Corporation.

[    2.467915] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI

[    2.467916] ixgb: Copyright (c) 1999-2008 Intel Corporation.

[    2.467924] ice: Intel(R) Ethernet Connection E800 Series Linux Driver - version ice-0.7.0-k

[    2.467925] ice: Copyright (c) 2018, Intel Corporation.

[    2.467959] jme: JMicron JMC2XX ethernet driver version 1.0.8

[    2.467974] sky2: driver version 1.30

[    2.468065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.468068] ehci-pci: EHCI PCI platform driver

[    2.468076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    2.468078] ohci-pci: OHCI PCI platform driver

[    2.468084] uhci_hcd: USB Universal Host Controller Interface driver

[    2.468299] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    2.468305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    2.469435] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810

[    2.469441] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    2.469750] hub 1-0:1.0: USB hub found

[    2.469767] hub 1-0:1.0: 12 ports detected

[    2.470621] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    2.470624] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    2.470626] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed

[    2.470786] hub 2-0:1.0: USB hub found

[    2.470800] hub 2-0:1.0: 6 ports detected

[    2.471207] usb: port power management may be unreliable

[    2.471288] usbcore: registered new interface driver uas

[    2.471299] usbcore: registered new interface driver usb-storage

[    2.471315] i8042: PNP: No PS/2 controller found.

[    2.471315] i8042: Probing ports directly.

[    3.882450] i8042: No controller found

[    3.882562] mousedev: PS/2 mouse device common for all mice

[    3.883002] rtc_cmos 00:03: RTC can wake from S4

[    3.883770] rtc_cmos 00:03: registered as rtc0

[    3.883779] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs

[    3.883788] i2c /dev entries driver

[    3.884034] i801_smbus 0000:00:1f.4: SPD Write Disable is set

[    3.884082] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt

[    3.885990] intel_pstate: Intel P-state driver initializing

[    3.886202] intel_pstate: HWP enabled

[    3.886210] sdhci: Secure Digital Host Controller Interface driver

[    3.886210] sdhci: Copyright(c) Pierre Ossman

[    3.886342] sdhci-pltfm: SDHCI platform and OF driver helper

[    3.886343] No iBFT detected.

[    3.886344] EFI Variables Facility v0.08 2004-May-17

[    3.905515] hidraw: raw HID events driver (C) Jiri Kosina

[    3.905659] usbcore: registered new interface driver usbhid

[    3.905659] usbhid: USB HID core driver

[    3.905856] NET: Registered protocol family 10

[    3.905970] Segment Routing with IPv6

[    3.905979] NET: Registered protocol family 17

[    3.905988] Key type dns_resolver registered

[    3.906042] microcode: sig=0x806ea, pf=0x40, revision=0x9a

[    3.906061] microcode: Microcode Update Driver: v2.2.

[    3.906068] sched_clock: Marking stable (3908854855, -2795823)->(3912903376, -6844344)

[    3.906171] Loading compiled-in X.509 certificates

[    3.906321] Btrfs loaded, crc32c=crc32c-generic

[    3.907501] console [netcon0] enabled

[    3.907502] netconsole: network logging started

[    3.907676] rtc_cmos 00:03: setting system clock to 2019-04-09 05:05:32 UTC (1554786332)

[    3.907700] ALSA device list:

[    3.907701]   No soundcards found.

[    3.908640] Freeing unused kernel image memory: 4816K

[    3.925262] Write protecting the kernel read-only data: 59392k

[    3.925847] Freeing unused kernel image memory: 2004K

[    3.926041] Freeing unused kernel image memory: 552K

[    3.926093] Run /init as init process

[    4.111954] usb 1-3: new full-speed USB device number 2 using xhci_hcd

[    4.256465] input: Pulse-Eight CEC Adapter as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:2548:1002.0001/input/input4

[    4.256633] hid-generic 0003:2548:1002.0001: input,hidraw0: USB HID v1.10 Mouse [Pulse-Eight CEC Adapter] on usb-0000:00:14.0-3/input2

[    4.378493] usb 1-4: new full-speed USB device number 3 using xhci_hcd

[    4.645144] usb 1-10: new full-speed USB device number 4 using xhci_hcd

[    5.808339] random: crng init done

[    6.435892] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[    7.261992] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[    7.278785] systemd[1]: Detected architecture x86-64.

[    7.280226] systemd[1]: Set hostname to <LibreELEC>.

[    7.305797] systemd[1]: Listening on udev Control Socket.

[    7.305843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    7.305872] systemd[1]: Listening on initctl Compatibility Named Pipe.

[    7.305930] systemd[1]: Listening on Journal Socket.

[    7.306780] systemd[1]: Mounting Variable Directory...

[    7.306885] systemd[1]: Created slice User and Session Slice.

[    7.306903] systemd[1]: Reached target Slices.

[    7.324248] kernel-overlays-setup: setup base modules

[    7.333928] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.17

[    7.340596] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware

[    7.340626] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays

[    7.340836] kernel-overlays-setup: done

[    7.383955] systemd-journald[212]: Received request to flush runtime journal from PID 1

[    7.595692] ite_cir: Auto-detected model: ITE8708 CIR transceiver

[    7.595693] ite_cir: Using model: ITE8708 CIR transceiver

[    7.595694] ite_cir: TX-capable: 1

[    7.595695] ite_cir: Sample period (ns): 8680

[    7.595695] ite_cir: TX carrier frequency (Hz): 38000

[    7.595696] ite_cir: TX duty cycle (%): 33

[    7.595697] ite_cir: RX low carrier frequency (Hz): 0

[    7.595697] ite_cir: RX high carrier frequency (Hz): 0

[    7.636080] Registered IR keymap rc-rc6-mce

[    7.639341] IR RC6 protocol handler initialized

[    7.644178] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[    7.647686] intel_rapl: Found RAPL domain package

[    7.647687] intel_rapl: Found RAPL domain core

[    7.647688] intel_rapl: Found RAPL domain uncore

[    7.647689] intel_rapl: Found RAPL domain dram

[    7.650403] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)

[    7.650561] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff9b592860)

[    7.658383] cdc_acm 1-3:1.0: ttyACM0: USB ACM device

[    7.660874] usbcore: registered new interface driver cdc_acm

[    7.660876] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    7.667425] rc rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0

[    7.667461] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input5

[    7.667539] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR receiver, raw IR transmitter

[    7.672321] ite_cir: driver has been successfully loaded

[    7.672810] usbcore: registered new interface driver snd-usb-audio

[    7.677872] Bluetooth: Core ver 2.22

[    7.677888] NET: Registered protocol family 31

[    7.677888] Bluetooth: HCI device and connection manager initialized

[    7.677892] Bluetooth: HCI socket layer initialized

[    7.677894] Bluetooth: L2CAP socket layer initialized

[    7.677898] Bluetooth: SCO socket layer initialized

[    7.681509] usbcore: registered new interface driver btusb

[    7.683827] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp

[    7.683829] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    7.683831] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    7.683832] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[    7.683833] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[    7.683834] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19

[    7.683836] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

[    7.693292] Bluetooth: hci0: Firmware revision 0.1 build 7 week 17 2018

[    7.703226] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[    7.762721] wl: loading out-of-tree module taints kernel.

[    7.762724] wl: module license 'MIXED/Proprietary' taints kernel.

[    7.762724] Disabling lock debugging due to kernel taint

[    7.774339] IR NEC protocol handler initialized

[    7.774354] Intel(R) Wireless WiFi driver for Linux

[    7.774355] Copyright(c) 2003- 2015 Intel Corporation

[    7.774416] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)

[    7.799243] iwlwifi 0000:00:14.3: loaded firmware version 38.755cfdd8.0 op_mode iwlmvm

[    7.802775] fuse init (API version 7.27)

[    7.898857] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    7.904037] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318

[    7.953670] iwlwifi 0000:00:14.3: base HW address: 00:bb:60:ba:d5:56

[    8.021095] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'

[    8.021633] thermal thermal_zone2: failed to read out thermal zone (-61)

[   10.733280] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6

[   10.737533] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8

[   10.737580] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

[   10.737767] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10

[   10.737803] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11

[   10.737838] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

[   10.737875] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13

[   10.737911] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14

[   10.894704] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[   10.894786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   10.897097] 8021q: 802.1Q VLAN Support v1.8

[ 6103.672147] PM: suspend entry (deep)

[ 6103.672149] PM: Syncing filesystems ... done.

[ 6103.674514] Freezing user space processes ... (elapsed 0.001 seconds) done.

[ 6103.675645] OOM killer disabled.

[ 6103.675645] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.

[ 6103.676526] Suspending console(s) (use no_console_suspend to debug)

[ 6103.743371] sd 2:0:0:0: [sdb] Synchronizing SCSI cache

[ 6103.743715] sd 2:0:0:0: [sdb] Stopping disk

[ 6104.580042] sd 1:0:0:0: [sda] Synchronizing SCSI cache

[ 6104.580242] sd 1:0:0:0: [sda] Stopping disk

[ 6104.586943] ite-cir 00:01: disabled

[ 6104.603556] e1000e: EEE TX LPI TIMER: 00000011

[ 6104.696280] PM: suspend devices took 1.017 seconds

[ 6104.830277] ACPI: EC: interrupt blocked

[ 6104.831419] ACPI: Preparing to enter system sleep state S3

[ 6104.834232] ACPI: EC: event blocked

[ 6104.834234] ACPI: EC: EC stopped

[ 6104.834235] PM: Saving platform NVS memory

[ 6104.834242] Disabling non-boot CPUs ...

[ 6104.851528] smpboot: CPU 1 is now offline

[ 6104.876213] smpboot: CPU 2 is now offline

[ 6104.891008] smpboot: CPU 3 is now offline

[ 6104.894769] ACPI: Low-level resume complete

[ 6104.894835] ACPI: EC: EC started

[ 6104.894835] PM: Restoring platform NVS memory

[ 6104.895595] Enabling non-boot CPUs ...

[ 6104.895617] x86: Booting SMP configuration:

[ 6104.895618] smpboot: Booting Node 0 Processor 1 APIC 0x2

[ 6104.896163]  cache: parent cpu1 should not be sleeping

[ 6104.896241] CPU1 is up

[ 6104.896253] smpboot: Booting Node 0 Processor 2 APIC 0x1

[ 6104.896869]  cache: parent cpu2 should not be sleeping

[ 6104.897044] CPU2 is up

[ 6104.897057] smpboot: Booting Node 0 Processor 3 APIC 0x3

[ 6104.897592]  cache: parent cpu3 should not be sleeping

[ 6104.897672] CPU3 is up

[ 6104.901630] ACPI: Waking up from system sleep state S3

[ 6104.908143] ACPI: EC: interrupt unblocked

[ 6105.073866] ACPI: EC: event unblocked

[ 6106.324121] ite-cir 00:01: activated

[ 6106.324439] sd 1:0:0:0: [sda] Starting disk

[ 6106.324450] sd 2:0:0:0: [sdb] Starting disk

[ 6106.385953] PM: resume devices took 1.310 seconds

[ 6106.386025] acpi LNXPOWER:04: Turning OFF

[ 6106.386054] OOM killer enabled.

[ 6106.386055] Restarting tasks ... done.

[ 6106.436814] thermal thermal_zone2: failed to read out thermal zone (-61)

[ 6106.436817] video LNXVIDEO:00: Restoring backlight state

[ 6106.436825] PM: suspend exit

[ 6106.639760] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 6106.644011] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[ 6106.644013] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[ 6106.644015] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[ 6106.663043] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[ 6106.663046] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[ 6106.663048] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[ 6106.673987] ata2.00: configured for UDMA/133

[ 6107.940266] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 6107.942605] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[ 6107.942614] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[ 6107.942620] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[ 6107.945502] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[ 6107.945509] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[ 6107.945516] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[ 6107.946160] ata3.00: configured for UDMA/133

[ 6109.239809] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[ 6978.707386] usb 1-2: new high-speed USB device number 5 using xhci_hcd

[ 6978.878865] usb 1-2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state

[ 6978.950358] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

[ 6978.950365] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)

[ 6978.953703] i2c i2c-7: Added multiplexed i2c bus 8

[ 6978.953705] rtl2832 7-0010: Realtek RTL2832 successfully attached

[ 6978.953715] usb 1-2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...

[ 6978.955850] r820t 8-003a: creating new instance

[ 6978.962655] r820t 8-003a: Rafael Micro r820t successfully identified

[ 6978.969792] Registered IR keymap rc-empty

[ 6978.969817] rc rc1: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1

[ 6978.969843] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1/input15

[ 6978.969898] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter

[ 6978.969919] usb 1-2: dvb_usb_v2: schedule remote query interval to 200 msecs

[ 6978.982163] usb 1-2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

[ 6978.982208] usbcore: registered new interface driver dvb_usb_rtl28xxu

[ 6983.514488] usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

[11899.956460] usb 1-2: USB disconnect, device number 5

[11900.008707] r820t 8-003a: destroying instance

[11900.008957] dvb_usb_v2: 'Astrometa DVB-T2:1-2' successfully deinitialized and disconnected

[11905.828249] usb 1-2: new high-speed USB device number 6 using xhci_hcd

[11905.987806] usb 1-2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state

[11906.065296] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

[11906.065315] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)

[11906.069513] i2c i2c-7: Added multiplexed i2c bus 8

[11906.069522] rtl2832 7-0010: Realtek RTL2832 successfully attached

[11906.069561] usb 1-2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...

[11906.069719] r820t 8-003a: creating new instance

[11906.076832] r820t 8-003a: Rafael Micro r820t successfully identified

[11906.086332] Registered IR keymap rc-empty

[11906.086438] rc rc1: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1

[11906.086535] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1/input17

[11906.086885] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter

[11906.086994] usb 1-2: dvb_usb_v2: schedule remote query interval to 200 msecs

[11906.099762] usb 1-2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

[11910.704376] usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

[12580.950608] usb 1-2: USB disconnect, device number 6

[12581.028476] r820t 8-003a: destroying instance

[12581.028867] dvb_usb_v2: 'Astrometa DVB-T2:1-2' successfully deinitialized and disconnected

[12587.111025] usb 1-2: new high-speed USB device number 7 using xhci_hcd

[12587.273703] usb 1-2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state

[12587.351377] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

[12587.351399] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)

[12587.355868] i2c i2c-7: Added multiplexed i2c bus 8

[12587.355879] rtl2832 7-0010: Realtek RTL2832 successfully attached

[12587.355927] usb 1-2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...

[12587.356226] r820t 8-003a: creating new instance

[12587.364316] r820t 8-003a: Rafael Micro r820t successfully identified

[12587.374530] Registered IR keymap rc-empty

[12587.374641] rc rc1: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1

[12587.374798] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1/input19

[12587.375252] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter

[12587.375441] usb 1-2: dvb_usb_v2: schedule remote query interval to 200 msecs

[12587.388119] usb 1-2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

[12591.955683] usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

[13089.298710] usb 1-2: USB disconnect, device number 7

[13089.392252] r820t 8-003a: destroying instance

[13089.392500] dvb_usb_v2: 'Astrometa DVB-T2:1-2' successfully deinitialized and disconnected

[13099.445131] usb 1-2: new high-speed USB device number 8 using xhci_hcd

[13099.604657] usb 1-2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state

[13099.682749] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

[13099.682767] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)

[13099.686866] i2c i2c-7: Added multiplexed i2c bus 8

[13099.686874] rtl2832 7-0010: Realtek RTL2832 successfully attached

[13099.686911] usb 1-2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...

[13099.687033] r820t 8-003a: creating new instance

[13099.695049] r820t 8-003a: Rafael Micro r820t successfully identified

[13099.705118] Registered IR keymap rc-empty

[13099.705227] rc rc1: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1

[13099.705358] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/rc/rc1/input21

[13099.705772] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter

[13099.705962] usb 1-2: dvb_usb_v2: schedule remote query interval to 200 msecs

[13099.718781] usb 1-2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected

[13104.314382] usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

[17543.713836] perf: interrupt took too long (2772 > 2500), lowering kernel.perf_event_max_sample_rate to 72000

[21748.761428] perf: interrupt took too long (3496 > 3465), lowering kernel.perf_event_max_sample_rate to 57000

[22193.816450] usbcore: deregistering interface driver cdc_acm

[22193.865159] PM: suspend entry (deep)

[22193.865162] PM: Syncing filesystems ... done.

[22193.867585] Freezing user space processes ... (elapsed 0.001 seconds) done.

[22193.868758] OOM killer disabled.

[22193.868758] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.

[22193.869924] Suspending console(s) (use no_console_suspend to debug)

[22193.937659] sd 2:0:0:0: [sdb] Synchronizing SCSI cache

[22193.937992] sd 2:0:0:0: [sdb] Stopping disk

[22194.874366] sd 1:0:0:0: [sda] Synchronizing SCSI cache

[22194.874529] sd 1:0:0:0: [sda] Stopping disk

[22194.881051] ite-cir 00:01: disabled

[22194.897722] e1000e: EEE TX LPI TIMER: 00000011

[22194.978927] PM: suspend devices took 1.110 seconds

[22195.114520] ACPI: EC: interrupt blocked

[22195.115664] ACPI: Preparing to enter system sleep state S3

[22195.118472] ACPI: EC: event blocked

[22195.118474] ACPI: EC: EC stopped

[22195.118476] PM: Saving platform NVS memory

[22195.118482] Disabling non-boot CPUs ...

[22195.136698] smpboot: CPU 1 is now offline

[22195.179115] smpboot: CPU 2 is now offline

[22195.195720] smpboot: CPU 3 is now offline

[22195.201030] ACPI: Low-level resume complete

[22195.201097] ACPI: EC: EC started

[22195.201097] PM: Restoring platform NVS memory

[22195.201847] Enabling non-boot CPUs ...

[22195.201870] x86: Booting SMP configuration:

[22195.201871] smpboot: Booting Node 0 Processor 1 APIC 0x2

[22195.202417]  cache: parent cpu1 should not be sleeping

[22195.202496] CPU1 is up

[22195.202507] smpboot: Booting Node 0 Processor 2 APIC 0x1

[22195.203116]  cache: parent cpu2 should not be sleeping

[22195.203290] CPU2 is up

[22195.203302] smpboot: Booting Node 0 Processor 3 APIC 0x3

[22195.203842]  cache: parent cpu3 should not be sleeping

[22195.203924] CPU3 is up

[22195.207900] ACPI: Waking up from system sleep state S3

[22195.214348] ACPI: EC: interrupt unblocked

[22195.378207] ACPI: EC: event unblocked

[22196.625277] ite-cir 00:01: activated

[22196.625580] sd 1:0:0:0: [sda] Starting disk

[22196.625616] sd 2:0:0:0: [sdb] Starting disk

[22196.687249] PM: resume devices took 1.307 seconds

[22196.687448] acpi LNXPOWER:04: Turning OFF

[22196.687508] OOM killer enabled.

[22196.687509] Restarting tasks ... done.

[22196.751267] thermal thermal_zone2: failed to read out thermal zone (-61)

[22196.751271] video LNXVIDEO:00: Restoring backlight state

[22196.751278] PM: suspend exit

[22196.760740] cdc_acm 1-3:1.0: ttyACM0: USB ACM device

[22196.761884] usbcore: registered new interface driver cdc_acm

[22196.761885] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[22196.941324] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[22196.945666] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[22196.945675] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[22196.945676] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[22196.964717] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[22196.964732] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[22196.964733] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[22196.975588] ata2.00: configured for UDMA/133

[22198.244502] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[22198.248167] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[22198.248168] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[22198.248170] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[22198.249778] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded

[22198.249780] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out

[22198.249781] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out

[22198.250342] ata3.00: configured for UDMA/133

[22199.794151] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

plesi

hmm...bohužel tenhle tuner má demodulátor Sony a tak ho buď někomu prodej a nebo ho používej na OS Windows.
Výpis dmesg máš vkládat do
"code",jinak tě admin tohoto fóra vykostí :-D

Kód:
Když je výpis moc dlouhý

[Obrázek: 1f4ec9bf-a8f4-4add-9491-14b27e556f14.png]

Jestli chceš mít jistotu,že koupíš správnou Astrometu s Panasonic,tak mrkni třeba zde:
http://rpishop.cz/usb-prislusenstvi/1199...t2-tv.html

Deniel33 · 10.4.2019, 18:11

Som upravil :-)

Tklf

Ahoj všem, zakoupil sem Xbox One DVB-T/T2/C tuner a připojil do čínské krabičky s funkčním CoreElec 9.0.1 na SD kartě. Mám na ní rozjetý Tvheadend s iptv. Chtěl sem začít používat i programy z klasické antény přes výše uvedený USB tuner. Když však tento připojím do USB portu, tak se v TV adapteréch žádný tuner neobjeví.

Ve výpisu dmesg vidím tuner identifikovaný, ale nikde nevidím, že by nabral ovladač a připojil ho systém k použití.

Kód:
[    5.803705@4] usb 1-2: new high-speed USB device number 3 using xhci-hcd

[    5.944095@6] usb 1-2: New USB device found, idVendor=045e, idProduct=02d5

[    5.944109@6] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    5.944116@6] usb 1-2: Product: Xbox USB Tuner

[    5.944123@6] usb 1-2: Manufacturer: Microsoft Corp.

[    5.944130@6] usb 1-2: SerialNumber: 002573160615

[    6.684265@7] scsi 0:0:0:0: Direct-Access        Mass  Storage Device        PQ: 0 ANSI: 0

[    6.685179@5] sd 0:0:0:0: [sda] 976773166 512-byte logical blocks: (500 GB/465 GiB)

Prosím o radu jak postupovat dál, nebo někde dělám chybu?
Linux je pro mně neznámá.
Díky.

plesi

Koukni na doplnky a dej vyhledat "dvb driver"... Někde to tam asi bude .
Nějak podobně jako na libreelec...
Mrkni na video:
http://cvh.libreelec.tv/LibreELEC/9.0_Le...addons.mp4

Tklf Napsal(a):Důvod editace: nedaří se mi vložit obrázek do code

Tag [img]
[Img]vložit odkaz na obrázek[/img]

Tklf · 10.4.2019, 20:41

Ha, fajn, je to tam.
Panasonic.
Jsou tam tři nabídky, postupně jsem prošel všechny, která pomohla netuším, asi ta poslední.
Děkuji za radu.
Jdu zkusit ladit podle návodu zde.

intommy

Po delsi dobe jsem nasel zas trochu casu se venovat TVHeadendu.

Stale plati ze na rPi s XBox tunerem je to ok, (problemy se signalem), m905x taky funguje.

Jak jsem jiz psal v nekterem z mych prispevku tak mam samozrejme i tu Astrometu.
Nedalo mi to a nahodil jsem na Core2Duo system Ubuntu a k nemu jsem to pripojil (zakladni deska MSI G41, 4GB ram, SSD disk - neni podstatny si myslim, ale valel se tu :) )
Ve vysledku se ten Astrometa tuner se "sonym" choval uplne jinak, viz obrazek
Pri ladeni to primo naslo i DVB-T2 kanaly, nemusel jsem jako na rPi prepisovat DVB-T na DVB-T2, proste zda se ze funguje na 100%. Zatim stale testuju ale asi to teda nakonec zrejme vyresim nejakou x86/64 a "dospelym" linuxem

*************************

Jedna se tedy o tento tuner: https://www.ebay.com/itm/DVB-T2-DVB-T-HE...2869531573

O nás

Navigace

Rychlé odkazy